Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Hesta Blasformtechnik GmbH & Co. KG
  3. HM310 / HM360

HM310 / HM360

HM310 / HM360
1 / 1 PageView full catalog

HM310 / HM360

Product catalog summary
Overview: This document provides technical specifications for the HM310 and HM360 extrusion blow moulding machines by HESTA Blasformtechnik GmbH & Co. KG, highlighting key data, energy requirements, and operational parameters.
Specifications:
  • Linear Mould Stroke: HM310 - 310 mm, HM360 - 360 mm
  • Mould Dimensions: Width - HM310: 330 mm, HM360: 380 mm; Length - 340 mm (370 mm optional for both); Thickness - 2x75 to 2x90 mm
  • Opening Stroke: 170 mm to 140 mm for both models
  • Platen Daylight: 320 mm for both models
  • Clamping Force: HM310 - 40 kN, HM360 - 60 kN
  • Dry Cycle Time: HM310 - 1.6 sec, HM360 - 1.8 sec
  • Centre Distances: Varying options for 2 to 6 fold configurations
Extruder Specifications:
  • Diameter Options: ø 50, ø 55, ø 60, ø 70
  • Drive: Electromotor, infinitely variable
  • Screw Speed: 0 to 85 min¯¹ for ø 50 and ø 55, 0 to 80 min¯¹ for ø 60 and ø 70
  • Screw Dimensions: 50/22 D, 55/22 D, 60/22 D, 70/22 D
Energy Requirements:
  • Electromotor Hydraulic: 11 kW for all models
  • Electromotor Extruder: Ranges from 17 kW to 30 kW depending on extruder size
  • Heating Capacity: Ranges from 12 kW to 24 kW
  • Electric Control: Approximately 1 kW
  • Total Connected Load: Ranges from 41 kW to 66 kW
  • Air Requirement: Approximately 500 to 600 Nl/min
  • Air Working Pressure: 7 to 10 bar
Cooling Requirements:
  • Hydraulic System: Ranges from 14,000 kJ/h to 23,000 kJ/h
  • Blow Mold: Ranges from 22,000 kJ/h to 38,000 kJ/h
Additional Information:
  • Standard voltage is 3 x 380V, 50 Hz
  • Alternative centre distances are possible upon request
  • Technical specifications are subject to change without prior notice
Contact Information: HESTA Blasformtechnik GmbH & Co. KG, Jahnstraße 84, D-73037 Göppingen, Phone: +49 (0) 71 61 / 504 67 - 0, Fax: +49 (0) 71 61 / 504 67 - 29, Email: [email protected], Website: www.hesta.de
See more

Catalog excerpts

HM310 / HM360-1

Extrusion Blow Moulding Machine HM310 / HM360 Single station blow moulder with horizontal linear mould shuttle Linear mould Stroke A 310 360 Clamping Force Centre Distances: German Quality since 1948 • Drive Electromotor, infinitely variable • Screw Speed Energy Requirements • Heating Capacity Extruder kW 12 14 17 24 • Electric Control, approx. kW 1111 • Total Connected Load, approx. kW 41 45 56 66 • Air Requirement, approx. Nl/min 500/600 500/600 500/600 500/600 Cooling Requirement • Hydraulic System • Blow Mold • Modification reserved; ' Alternative centre distances possible; ' Please ask for additional equipment. HESTA Blasformtechnik GmbH & Co. KG The effective consumption data for Energy- and cooling requirements value, he can change according to produced article.

 Open the catalog to page 1

All Hesta Blasformtechnik GmbH & Co. KG catalogs and technical brochures

  1. HFD490
    HFD490

    1  Page

  2. HG360E / HG460E
    HG360E / HG460E

    1  Page

  3. HG360 / HG460
    HG360 / HG460

    1  Page

  4. HMD310 / HMD360
    HMD310 / HMD360

    1  Page

  5. HM310E / HM360E
    HM310E / HM360E

    1  Page

  6. HV180E / HV200E
    HV180E / HV200E

    1  Page

  7. HV180 / HV200
    HV180 / HV200

    9  Pages

  8. HM-series
    HM-series

    3  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.