Catalog excerpts
HE 5120 Technical alterations reserved HE_5120_en Version 2.0 / 18. Februar 2011 The CAN display HE 5120 is used for the visualisation e.g. of weight and level. The various physical units are identied over the LEDs. The device has a switch contact, which can be used optionally as digital output or limit switch. The CAN bus connection takes place according to ISO 11898. The display with integrated FULL-CAN-Controller supports the transmission according to CAN-specication 2.0A / 2.0B with max. 1 MBaud. It is dened through parameter-setting, which information is displayed from a TECHNICAL DATA CAN-Message in which format. The settings of the parameterisation are stored non-volatile. You can nd further information at www.hesch.de ORDERING DATA Power supply Current consumption Potential-free change-over contact (250 V AC / 5 A) Control panel built-in casing according to DIN 43700. front: lter screen, red 96 x 24 x 110 mm (W x H x D) Electrical connection Switch output Display range Operating temperature ORDER NUMBER Back-mounted screw plug terminal strips, 2.5 mm2 APPROVAL Conformity marking
Open the catalog to page 1
