Spiral braiding machine type SP 2/1/12-90

Product catalog summary

Overview: The SP Series spiral braiding machines are designed for creating spiral braids with diameters ranging from 0.5 to 30 mm, depending on the machine type. These machines are known for their high bobbin volume, reliability in continuous operation, high output, low maintenance requirements, and ease of operation.

Specifications:

Pitch sizes range from 67.5 mm to 192.5 mm.
Machines are available with different configurations, including 1 or 2 heads and varying numbers of carriers per head (12 or 20).
Dimensions and weights vary by model, with lengths from 800 mm to 1575 mm, widths from 535 mm to 1050 mm, heights from 1600 mm to 2500 mm, and weights from 280 kg to 1350 kg.
Motor power ranges from 0.37 kW to 1.1 kW, with horngear speeds from 120 rpm to 260 rpm.
Central tube diameters and bobbin sizes vary, with bobbin volumes ranging from 265 ccm to 2827 ccm.

Options and Features:

Take-off for braiding into cans and take-up onto drums are available as options.
Electronic lay length control and electronic braid point control are available on most models.
Patented braiding dies support maximum diameters from 12 mm to 32 mm.
Soft start and empty bobbin control are standard features.

Contact Information: For further inquiries, contact August Herzog USA or August Herzog Maschinenfabrik GmbH & Co. KG through the provided phone numbers, fax, or email addresses.

Catalog excerpts

Spiral braiding machine type SP 2/1/12-90-1

Braiding machines CLEVER SOLUTIONS SINCE 1861 SPIRAL BRAIDING MACHINE SP SERIES, pitch sizes from 67,5 - 192,5 mm recommended for spiral braids with 0.5 - 30 mm diameter (depending on the machine type) ► high bobbin volume e-mail: [email protected] August Herzog Maschinenfabrik GmbH & Co. KG e-mail: [email protected]

Open the catalog to page 1