HZ-FA-110
4Pages

DAQ_BOXHZ-FA-110 HZ-FA-110 DAQ BOX is the all-in-one device of the air sonar system which includes the built-in datalogger and the 2 built-in sonar sensors. This system has two channels of high-speed data acquisition of signals. TCP/IP communication protocol is used to couple with Hertzinno Software SDK or other third-party software platforms to realize the function of sound characteristics detection in specific scenarios. Key Feature • Dual-channel synchronous acquisition, supporting up to 125kHz sampling rate • Supports Ethernet communication, RJ45 data interface, easy to access the network • 25°C~ + 55°C Working temperature, strong environmental adaptability • IP67 Waterproof • Compact size; easy to install and carry. • Low Power consumption, suitable for scenarios with low power consumption requirements • Overvoltage, overcurrent and anti-reverse connection protection functions

Model Industrial Power Source Data Interface Working Temperature Range Ingress Level Overvoltage Protection Overcurrent Protection Anti-reverse connection Protection Microphone SNR Freq Response Sensitivity Direction General Product Size Product Weight Sensor Qty Sensor Type Sampling Mode Sampling Frequency ADC ill HERTZlNND ■I1 HZ-FA-110 DV 12V Ethernet -20°C ~ 50 °C IP67 Supported Supported Supported 110mm*64mm*38mm 200g 2 Internal Sensors Synchronized Acquisition 20kHz/48kHz/125kHz 24 bit

◼ Installation System Connection DC 12V 2 microphones Target Under Test Switch Board Device Installation There are four 3mm threaded mounting holes on the back of the DAQ Box. During actual installation, it can be fixed wallmounted or pole-mounted.

◼ Note • When installing, the sensor needs to face the equipment to be monitored and avoid obstructions in the middle, such as beams, walls, big trees, and light poles. • When installing, keep a certain height so that the pickup hole of the sensor equipment is tilted downward or at least keep it installed horizontally to prevent dust from accumulating in the pickup hole of microphone after the equipment is installed. • Before installation, user need to carefully check whether the waterproof sound-permeable membrane is intact. During the installation process, avoid scratching the...