Metal processing with Klaeger C oolTool: C ooling with no follow-up costs.

K l a e g e r C oolT ool – T he environ m entally friendly mini mal c o o l i n g and lubrication syste m for m etal processing. Klaeger CoolTool is an environmentally friendly minimal lubrication system for conventional metal processing. Operating pressure 4-6 bar, ready for connection for 230 Volt (mobile and stationary) or for 24 volt (only stationary). Portable unit is in a mobile case: CoolTool is ready to work at any machine in only a few minutes. Also for retrofitting: The Klaeger CoolTool attachment with the complete installation kit can be installed at any semiautomatic machine in less...

The CoolTool micro-dosing system cools without any liquid residues by spraying directly onto the cutting point. Conventional emulsion Saves disposal costs: Klaeger CoolTool needs up to 95 percent less coolant as conventional dosing systems – and the cooling effect is the same! CoolTool Fluid As a consequence, you will not only save the disposal costs for the coolant, but also the costs for the cleaning of machine and work pieces. Thus, Klaeger CoolTool will pay for itself after a very short period of time. · up to 150 hours of production with only half a litre of fluid · reduced friction through...

K l a e g e r C oolT ool Fluid. E n v i r o nmentally friendly and econo m ical. The harmless CoolTool fluid which is based on rape oil is extremely economical and optimally composed for the minimal dosing of the the CoolTool device. Klaeger CoolTool fluid does not cause any skin problems which are known with conventional coolants containing crude oil. Klaeger CoolTool Fluid – less than one litre lasts for up to 150 hours of production. Subject to technical changes Klaeger CoolTool Fluid – no cleaning, no groundwater contamination, no disposal costs. Hermann Klaeger GmbH Ernst-Heinkel-Straße...