6311 Bluetooth® Housed Receiver - 2 Pages

Add to MyDirectIndustry favorites
6311 Bluetooth® Housed Receiver

Catalog excerpts

Bluetooth® Housed Receiver - 6311-BLE-002 ikli.f.Ml.f.WIBI • Secure PAN (Personal Area Network), with up to 2 transmitters • Ultra low power with 1^A sleep current • Range: Nominally 10 m (up to 25 m line of sight, Latency may increase with range) • Selectable Latency: • Setting 1. Typically <150 ms at 10 m • Setting 2. Typically <75 ms at 10 m • LED indication of battery status • Choice of 15 or 60 minutes timeout for further battery conservation • Auto wake from sleep/re-connect on press of the pedal Supply rating Operating temperature Output configuration Switch output: Normally open contact relay Body material Thermoplastic - Standards/approvals Low Voltage Directive 2014/35/EU, REACH, RoHS & Degree of protection EN 60529 IP44 WEEE The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Herga Technology is under license. Other trademarks and trade names are those of their respective owners. 6311 Bluetooth Housed Receiver 17/11 Connections Cable connections via 300mm long cable with free wire ends: • Power connections • Relay outputs • Battery Indication output • PWM output Storage temperature -20 to +65°C Radio type approvals Europe (ETSI RED) US (FCC/CFR 47 part 15 unlicensed modular transmitter approval) Canada (IC RSS) Certification and Radio Equipment Directive 2014/53/EU: compliance • Effective use of frequency spectrum: EN 300 328 • EMC: EN 301 489-1, EN 301 489-17, EN 610006-2 • Health and safety: EN62479, EN 60950-1 Medical Device Directive 93/42/EEC: • EN 60601-1-2 Compliant (Customer's risk assessment required) • EN 60601-1

 Open the catalog to page 1

Bluetooth® Housed Receiver – 6311-BLE-002 Pairing LED Output Active LED Power LED Pairing Button Transmitter 2 connections status Indication LED Battery Level Indication LED Transmitter 1 connections status Indication LED Removing the rear panel gives the user access to switches for setting the latency of the system and sleep timeout of the connected transmitters Cable connections Function Wire colour Battery Indication output Blue Blue/Red For full instructions for use of the Herga wireless footswitch systems visit www.herga.com Green Green/White Brown Brown/Green Yellow Yellow/Brown White...

 Open the catalog to page 2

All HERGA catalogs and technical brochures

  1. 6310 & 6311

    2 Pages

  2. 6227-S

    1 Pages

  3. Herga_6448

    1 Pages

  4. Herga_6241

    1 Pages

  5. MPL

    1 Pages

Archived catalogs