SINGLE-SHAFT SHREDDER Technical data Type Feed cylinder stroke [mm] Number of rotor knives Stator knife rows Rubber tires Thick-walled semi-finished products For pre-shredding, Herbold Meckesheim offers two series of single-shaft shredders for the most distinctive tasks. Standard stroke [mm] Standard drive [kW] 2 rows with 2 knives 2 rows with 3 knives 2 rows with 4 knives 2 rows with 5 knives Universal rotor standard Universal rotor standard Universal rotor standard Universal rotor standard Hammer mills Granulators Pulverizing systems Washing systems & components Plastcompactors/agglomerators Stator knives Hydraulic swivelling of screen basket Weight [kg] Electronic with SPS Siemens Rotor Special rotor designs are available for special materials such as clumps, pipes. Subject to technical modifications For more information, please see our videos on our website www.herbold.com Pre-shredding is a required step when the feedstock is too bulky for the granulator or when coarse pre-crushing is necessary for sorting, screening or control purposes. The following pre-shredders can be implemented: Shredders, HOG shredders, guillotines and hammer mills. Universal implementation for a wide range of materials Powered drive technology Cycle and volume dependent control of the shredding process Easy maintenance, fast screen exchange, reusable knives Customer-oriented solution - Herbold single-shaft shredder ■ Depending on the material and requirements different screen sizes are used. The ground material produced by the shredder has a low proportion of fines and has a homogenous size. Typical area for application: ■ ■ ■ ■ ■ ■ ■ Recycling plants for film bales, production waste Film plants for rejects at intermittent and multi-layer loads Injection molding and blowing operations for large hollow bodies Problematic materials, such as sintered semi-finished product waste Thick-walled pipes Cable recycling DSD preparation Herbold Meckesheim GmbH Industriestr. 33 | 74909 Meckesheim | Postfach 1218 | 74908 Meckesheim | Deutschland Tel.: + 49 (0) 6226/932-0 | Fax: + 49 (0) 6226/932-495 E-Mail: [email protected] | Internet: www.herbold.com Robust and sturdy construction design, also for extreme demands Subsidiary in the US: Herbold Meckesheim USA | Resource Recycling Systems Inc. 130 Industrial Drive | North Smithfield, RI 02896, USA | P.O. Box 239 | Slatersville, RI 02876, USA Tel.: + 1 401 597/5500 | Toll-free (US/CDN): +1 888/612 RRSI (7774) | Fax: + 1 401 597/5535 E-Mail: [email protected] | Internet: www.herboldusa.com All indications are not binding and subject to change. 01/2017 Granulators & shredders | Pulverizers | Plastcompactors/agglomerato

SINGLE-SHAFT SHREDDER HR 102 P with rear pressure device Functioning of single-shaft shredder Implementation area with innovative technology Series HR for small to medium capacity Single-shaft shredder Series HR ■ Herbold single-shaft shredder of the series HR are strong, durable, and suited for tough applications and a wide assortment of materials. HR Shredder is slow and quiet, so often no sound insulation is required. It is impervious to foreign contamination and reaches high knife life cycles. The result: Cleanly pre-cut material with low percentage of fines. Once the material has been inserted...

SINGLE-SHAFT SHREDDER Technical data Type Feed cylinder stroke [mm] Number of rotor knives Stator knife rows Rubber tires Thick-walled semi-finished products For pre-shredding, Herbold Meckesheim offers two series of single-shaft shredders for the most distinctive tasks. Standard stroke [mm] Standard drive [kW] 2 rows with 2 knives 2 rows with 3 knives 2 rows with 4 knives 2 rows with 5 knives Universal rotor standard Universal rotor standard Universal rotor standard Universal rotor standard Hammer mills Granulators Pulverizing systems Washing systems & components Plastcompactors/agglomerators...