Product Overview
This document provides an overview of a new low-profile lead screw-driven linear motion solution featuring a standard lead screw with a hand brake. The product utilizes Gliding Surface Technology (GST) for enhanced performance.

Specifications
The document outlines the static load capacities for both standard and low-profile uni-guides. The maximum load and speed capacities depend on the drive mechanism selected, such as lead screws or ball screws. Key specifications include:

• Maximum Speed Dry: 300 ft./min. (1.524 m/s)
• Maximum PV (Pressure x Velocity): 20,000 (0.70 N/mm² x m/s)
• Frelon GOLD® bearing material coefficient of friction: 0.125

Load Capacities
Tables provide detailed load capacities for different sizes and configurations, including:

• Standard sizes (D075, D100, D125) with varying maximum loads in lbs and N.
• Low-profile sizes (UGA040C series) with specific load capacities.

Design Considerations
Designs must adhere to dynamic parameters, ensuring loads do not exceed a 2:1 ratio to the length of the bearings to prevent binding. The document emphasizes the importance of centering the drive mechanism on the carriage.

Dimensions and Weights
Detailed dimensions for standard inch series without a drive mechanism are provided, including bolt sizes, T-slot information, and standard lengths. Carriage types and their respective weights are also listed.

Conclusion
This technical document serves as a comprehensive guide for selecting and implementing the appropriate linear motion solution based on specific load and speed requirements, ensuring optimal performance and reliability.