Catalog excerpts
MFS machine fencing system
Open the catalog to page 1
Introducing the MFS Machine Fencing System The HepcoMotion MFS Machine Fencing System compatible with our MCS aluminium profile product range provides economical barriers around machine installations such as Gantries, Pick and Place equipment and floor mounted robot systems Conforming to current Industry standards this maintenance free system is easy to construct and offers a lower cost alternative to steel fence constructions. End cap Two-slot profile Provides a mid section support either vertical or horizontal to vertical profile sections. break up large single frames and ensure maximum...
Open the catalog to page 2
Vertical post Utilising our MCS 45 Light and 45/90 Light section the vertical post is secured into the Foundation Block with standard T-Bolts and Nuts. The 45/90 Light provides additional support and rigidity where long unsupported runs are necessary, corners, returns and around door frames. The 10mm T-slot allows the panel mounting kit, hinges etc. to be speedily assembled using our standard or sprung loaded T-nuts. Sliding doors A range of sliding door movements can be developed into the Machine Fencing System with or without a lower Connection screws support profile. The latter is...
Open the catalog to page 3
MFS Standard Panel sizes 18±1.5 L = 500, 750, 1000, 1500, 2000 other sizes available on request Fencing Profile (1 Slot) Fencing Profile (2 Slots)
Open the catalog to page 4
Ordering Details End caps 1-243-7002 Slot profile 45x45 profile 1-243-4042 45x90 profile 1-243-4044 45x45 Light profile Random 5.6m Two slot profile (random 5.6m) One slot profile (random 5.6m) Mesh/panel retaining clip 45x90 Light profile Random 5.6m 1-242-1034 Connection screw for slot profiles Sponge retaining strip (retaining mesh in 45 profiles 10mm T-slot) Handle for 45 profiles (order with 2 off M8 T-nut 1-242-1002 & M8x20 cap head screw) Connection screw for 45 & 90 profiles HepcoMotion’s MFS system can be supplied as pre-assembled panels to the customer’s drawings or as individual...
Open the catalog to page 5
Linear Guidance and Transmission System Aluminium Frame and Machine Construction System Driven Track System Product Range Heavy Duty Slide System Powerslide-2 Guided Rodless Cylinder Ballscrew Premier Ring Slides and Track System Stainless Steel Based Slide System Heavy Duty Driven Linear System Linear Transmission and Positioning System Vee Slide Linear Guidance Systems Profile Driven Unit Product Range HepcoMotion – Exclusive European partners and distributors for Bishop-Wisecarver since 1984. ® Single Edge Slide System Aluminium Based Slide System Lightweight U Channel Guideway Linear...
Open the catalog to page 6All HepcoMotion catalogs and technical brochures
-
HLG Hepco Linear Ball Guides17 Pages
-
SBD Sealed Belt Drive11 Pages
-
HGS gantry solutions9 Pages
-
HDS2 Heavy Duty Slide System27 Pages
-
DTS2 Dynamic Track Systems8 Pages
-
PRT2 No. 2 Installation Details10 Pages
-
PRT2 No.8 DTS Components19 Pages
-
PRT2 No. 11 Mix & Match3 Pages
-
PRT2 1-Trak8 Pages
-
Floating Bearings2 Pages
-
DualVee Wash Down Wheels2 Pages
-
MCS Catalogue36 Pages
-
Profiles with Linear Guides8 Pages
-
ALR Aluminium Rings4 Pages
-
HTS Drawer Slides Catalogue40 Pages
-
MHD Catalogue8 Pages
-
PSD80 No.1 Ballscrew6 Pages
-
HDRT Heavy Duty Ring and Tracks13 Pages
-
Uni-Guide – Product Overview4 Pages
-
ZIMM GSZ & Z Series Screw Jacks196 Pages
Archived catalogs
-
BSP Ballscrew Premier9 Pages
-
SL2 Stainless Steel Slide System15 Pages
-
PRT2 No.6 Bleed Lubrication8 Pages
-
DualVee Technical Data Guide12 Pages
-
DualVee Guide Wheels Catalogue11 Pages
-
MCS – RapiLok2 Pages
-
ZIMM – Z Series Leaflet4 Pages
