Website:
HepcoMotion
Group: Hepco
Catalog excerpts
This data sheet interacts with MCS - RapiLok HepcoMotion® RapiLok is a new style of profile connector for use with the MCS aluminium frame and machine construction system, and provides a quick and rigid joint. Designed for use with Hepco MCS slot 10 profiles*1, to secure two sections of profile mounted at right angles, RapiLok has significant benefits over alternative profile connections. RapiLok is a no-drill connector, profiles require no machining, and only one profile needs to be tapped, significantly reducing costs, and avoids fiddly assembly associated with brackets, reducing assembly time. The design of RapiLok ensures that the resulting joint is anti-rotation, and therefore suitable for twisting loads. Assembly is carried out using a single hexagon key, and takes a matter of seconds. Serrated faces on the underside of the nut, grip onto the smooth faces on the MCS profiles, making it the ideal choice in applications where additional loads are applied. RapiLok is easily adjustable, can be used in multiple orientations, and leaves profile T-slots free for panels etc. Visit www.HepcoMotion.com/MCSdatauk and select RapiLok to view a product demo or contact our sales department for a RapiLok sample. RapiLok RapiLok Screw - M12 RapiLok setting marks Serrated faces Typical joint
Open the catalog to page 1
MCS - RapiLok Data and Dimensions 29.2 RapiLok Assembly 4.1 RapiLok has been designed to suit Hepco’s own MCS range, but can be used with alternative aluminium frame building systems, where 18.3 dimensions allow. Note the orientation of the nut, and assemble the screw into the nut. Screw into the tapped profile. The RapiLok screw has two setting marks, as shown above. The first line is for size 40 & 80 family profiles, and the second for 45 & 90 family profiles. Depending on which size profile is to be connected, position the screw so that the corresponding mark is lined up with the profile edge....
Open the catalog to page 2All HepcoMotion catalogs and technical brochures
-
HDRT Heavy Duty Ring and Tracks13 Pages
-
PSD80 No.1 Ballscrew6 Pages
-
MHD Catalogue8 Pages
-
HTS Drawer Slides Catalogue40 Pages
-
ALR Aluminium Rings4 Pages
-
MCS – RapiLok2 Pages
-
Profiles with Linear Guides8 Pages
-
MCS Catalogue68 Pages
-
Uni-Guide – Product Overview4 Pages
-
DualVee Wash Down Wheels2 Pages
-
DualVee Short Form Catalogue8 Pages
-
ZIMM – Z Series Leaflet4 Pages
-
ZIMM GSZ & Z Series Screw Jacks196 Pages
-
MCS Catalogue68 Pages
-
Floating Bearings2 Pages
-
PRT2 1-Trak8 Pages
-
PRT2 No. 11 Mix & Match3 Pages
-
PRT2 No.8 DTS Components19 Pages
-
PRT2 No.6 Bleed Lubrication8 Pages
-
PRT2 No. 2 Installation Details10 Pages
-
DTS2 Dynamic Track Systems8 Pages
-
PRT2 No.6 Bleed Lubrication8 Pages
-
Profiles with Linear Guides8 Pages
-
HepcoMotion1 Pages
-
No 14 PRT2 1-Trak8 Pages
-
ZIMM Z Series Screw Jack196 Pages
-
DTS2 Dynamic Track System8 Pages
-
PRT2 1-Trak8 Pages
-
MCS Catalogue68 Pages
-
ZIMM GSZ & Z Series Screw Jacks196 Pages
-
HDS2 Heavy Duty Slide System40 Pages
-
SL2 Stainless Steel Slide System28 Pages
-
HLG Hepco Linear Ball Guides31 Pages
-
HGS gantry solutions4 Pages
-
MFS machine fencing system6 Pages
-
No. 6 Bleed Lubrication8 Pages
-
ZIMM – Z Series Leaflet4 Pages
-
SBD Sealed Belt Drive20 Pages
-
PRT Ring Slides and Track System64 Pages
-
DualVee Single Edge Slide System28 Pages
-
BSP Ballscrew Premier20 Pages
