Group: Hepco
Catalog excerpts
aluminium based slide system
Open the catalog to page 1Hepco LoPro Hepco LoPro has been introduced to provide the designer with a lightweight yet rugged linear slide system. LoPro is aluminiumbased with steel tracks securely fixed, and is ideal for applications requiring medium accuracy guidance. A range of track widths is available to closely match the requirements of a wide range of machine designs. As it’s name suggests, LoPro is compact and has a low overall profile making it suitable for space restricted applications where good load capacity is needed. The unique Track Plate design incorporates a recess which can be used to accept the chosen...
Open the catalog to page 2System Composition/Design Points Hepco LoPro consists of an aluminium base plate with hardened ‘vee’ track, comprising the Track Plate Assembly, and an aluminium carriage plate with four guide wheels comprising the Wheel Plate Assembly. The Track Plate Assembly is exceptionally rigid - the ‘vee’ track is securely fixed to the aluminium base plate by a number of bolts screwed into tapped holes along the track length. This method of fixing ensures that the track does not move on its base when heavy loads are applied. The standard track is carbon steel, with stainless steel track and stainless...
Open the catalog to page 3System Dimensions Assembled System Wiper Version LOCATION DOWEL SIZE 0M TAPPED HOLE SCREW SIZE N Basic Version Location dowel holes M are drilled to accept imperial dowels TAPPED HOLE
Open the catalog to page 4System Dimensions Track Plate Assembly 1. Tolerances on all dimensions in the above tables (except X) will be ± 0.1mm. Overall length tolerance L will be controlled to within ±0.5mm. Track parallelism is ± 0.04mm over a 3 metre length. 2. Length L should be specified as multiples of C + (2X). Non standard lengths can be supplied to customer’s requirements. In these cases please contact Hepco’s Technical Department for positioning of base and track holes. Maximum lengths in one piece: Size Size Size Size Example: Size 3 Track plate Total standard length 1428mm = 9 x C + 2X = 9 x 152 + 2(30)...
Open the catalog to page 5Technical Data The load and life for Hepco LoPro systems will be determined by several factors including system size, the number and arrangement of wheel plates, the type and direction of the applied loads, speed of travel, length of stroke and the state of lubrication. System size Wheel Plate * Load figures should be reduced by 25% where the Stainless Steel option is specified. Figures for wiper wheel plates are based on the basic dynamic load rating of the bearings. The figures for basic wheel plates assume unlubricated operation. If adequate alternative means of lubrication is provided,...
Open the catalog to page 6The life figures quoted above are based on the theoretical (L10) life for each wheel and assume that the system is running in a normal shock-free duty, that the stroke is longer than the wheel plate and that the system is adequately lubricated (for lubricated operation). Any adverse conditions will reduce the system life, so it is recommended to use a generous factor of safety where conditions are less than ideal, or where the reliability required is high. Once this load factor has been calculated, the resultant figure should be inserted into the appropriate life formula below, to calculate...
Open the catalog to page 7Hepco products are available worldwide please request our catalogue FPL or visit our website: Guiding You Towards the Future HEPCO SLIDE SYSTEMS LIMITED Lower Moor Business Park, Tiverton Way Tiverton, Devon, England EX16 6TG Tel: 01884 257000 Fax: 01884 243500 hepco.sales@hepco.co.uk CATALOGUE No. LoPro 03 UK © 2002 Hepco Slide Systems Ltd. Reproduction in whole or part without prior authorisation from Hepco is prohibited. Although every effort has been made to ensure the accuracy of the information in this catalogue, Hepco cannot accept liability for any omissions or errors. Hepco...
Open the catalog to page 8All HepcoMotion catalogs and technical brochures
-
HDRT Heavy Duty Ring and Tracks
13 Pages
-
PSD80 No.1 Ballscrew
6 Pages
-
MHD Catalogue
8 Pages
-
HTS Drawer Slides Catalogue
40 Pages
-
ALR Aluminium Rings
4 Pages
-
MCS – RapiLok
2 Pages
-
Profiles with Linear Guides
8 Pages
-
MCS Catalogue
68 Pages
-
Uni-Guide – Product Overview
4 Pages
-
DualVee Wash Down Wheels
2 Pages
-
DualVee Short Form Catalogue
8 Pages
-
ZIMM – Z Series Leaflet
4 Pages
-
ZIMM GSZ & Z Series Screw Jacks
196 Pages
-
MCS – RapiLok
2 Pages
-
MCS Catalogue
68 Pages
-
Floating Bearings
2 Pages
-
PRT2 1-Trak
8 Pages
-
PRT2 No. 11 Mix & Match
3 Pages
-
PRT2 No.8 DTS Components
19 Pages
-
PRT2 No.6 Bleed Lubrication
8 Pages
-
PRT2 No. 2 Installation Details
10 Pages
-
DTS2 Dynamic Track Systems
8 Pages
-
PRT2 No.6 Bleed Lubrication
8 Pages
-
Profiles with Linear Guides
8 Pages
-
HepcoMotion
1 Pages
-
No 14 PRT2 1-Trak
8 Pages
-
ZIMM Z Series Screw Jack
196 Pages
-
DTS2 Dynamic Track System
8 Pages
-
PRT2 1-Trak
8 Pages
-
MCS Catalogue
68 Pages
-
ZIMM GSZ & Z Series Screw Jacks
196 Pages
-
HDS2 Heavy Duty Slide System
40 Pages
-
SL2 Stainless Steel Slide System
28 Pages
-
HLG Hepco Linear Ball Guides
31 Pages
-
HGS gantry solutions
4 Pages
-
MFS machine fencing system
6 Pages
-
No. 6 Bleed Lubrication
8 Pages
-
ZIMM – Z Series Leaflet
4 Pages
-
SBD Sealed Belt Drive
20 Pages
-
PRT Ring Slides and Track System
64 Pages
-
DualVee Single Edge Slide System
28 Pages
-
BSP Ballscrew Premier
20 Pages