

Catalog excerpts

Contents Introducing the HepcoMotion® HTS Feature and Benefits –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– RECOMMENDED APPLICATIONS –––––––––––––––––––––––––––––––––––––––––– STANDARD MATERIAL SPECIFICATIONS –––––––––––––––––––––––––––––––––– ORDERING INFORMATION CUSTOMIZED SLIDES –––––––––––––––––––––––––––––––––––––––––––––––––––––– FEATURE REFERENCE TABLE –––––––––––––––––––––––––––––––––––––––––––––– Load Rating
Open the catalog to page 2
HTS Hepco Telescopic Ball Bearings Slides Hepco telescopic ball bearing slides are manufactured under strict quality control conditions backed by ISO 9002 certification using the highest quality materials and up to date manufacturing processes. These high quality slides are quiet, rigid under extended loads and due to the superior construction offer excellent smooth motion and low friction characteristics across the complete travel length. A reference table showing the complete range can be seen on page 5, each series having specific cross section and load carrying characteristics from...
Open the catalog to page 3
Construction • 2 Member Slide Explanation of terms Load rating Load rating is the maximum recommended load for a pair of slides. Slides are side-mounted and based on a 10,000 cycle dynamic test. This test is based on the centre of gravity of the load being in the mid-point of the complete open travel and in the middle of the drawer (drawer width is 400 mm). For drawer widths in excess of 400mm please contact our technical department. Load rating & duty cycle Load rating and duty cycle are closely related. Load rating should be looked at in conjunction with the number of cycles i.e. high...
Open the catalog to page 4
Explanation of terms cont. Travel (Extension) 3/4 Travel - slide extends approximately 3/4 of the total slide length, for applications not requiring complete access to drawer/components. Over Travel - slide extends further than the length of the slide allowing total and easy access to the drawer/ components, often a convenient feature. Both Side Travel - slide is able to extend in either direction allowing access to drawer or components from either side of the cabinet. Linear Motion - contains an inner moving member which movement is restricted to within the slide. Lever Disconnect -...
Open the catalog to page 5
Mounting To acheive smooth running; Maintain parallelism between rails Secure balance by drawing in and out with 5–6Kg weight load before fixing. Examples of mounting A : Recommended B : Not Recommended, but usable C : Not Recommended Customized Slides Provide the solution to your suspension or movement requirements as shown below. The following are only some of the ways Slide rails can be customized to suit your application. Please contact our technical department for further information.
Open the catalog to page 6
• Lever Disconnect • Lever Disconnect/Lock-Out • Lever Disconnect • Lever Disconnect/Lock-Out Over travel • Non-Disconnect Both Side Travel Linear Motion 3/4 travel • Non-Disconnect Rating at min travel Rating at max travel LOAD RATING Medium Light Super Slim
Open the catalog to page 7
SUPER SLIM TS–2011 LINEAR MOTION SLIDE Model TS–2011 Linear motion Load rating (per pair) 20kg at min travel 15kg at max travel Outer member Inner member Travel length Part number Slide weight kg/pair
Open the catalog to page 8
SUPER SLIM TS–2020 DISCONNECT BOTH SIDE TRAVEL SLIDE Model TS–2020 Both side travel Load rating (per pair) 20kg at min travel 15kg at max travel Equal or under when closed Outer member Inner member Travel length Slide length Travel length Part number Slide weight kg/pair
Open the catalog to page 9
SUPER SLIM TS–2021 3/4 TRAVEL SLIDE Model TS–2021 Load rating (per pair) 20kg at min travel 15kg at max travel Equal or under when closed Travel length Outer member Inner member Access hole Access hole Part number Slide weight kg/pair
Open the catalog to page 10
SUPER SLIM TS–2025 LEVER DISCONNECT LOCK OUT 3/4 TRAVEL SLIDE Model TS–2025 Load rating (per pair) 20kg at min travel 15kg at max travel Equal or under when closed Front lock arm Slide length Travel length A Outer member Ø3.2 Disconnect lever Ø3.2X3.8 slot Inner member Part number Slide weight kg/pair
Open the catalog to page 11
SUPER SLIM TS–2031 OVER TRAVEL SLIDE Model TS–2031 Over travel Load rating (per pair) 20kg at min travel 15kg at max travel Equal or under when closed Travel length Outer member Inner member Access hole Part number Slide weight kg/pair
Open the catalog to page 12
MEDIUM LIGHT TS–U270 3/4 TRAVEL SLIDE (ALL STAINLESS STEEL) Model TS–U270 3/4 travel Load rating (per pair) 29–38kg (see table) #8(M4) pan head screw Non-disconnect Equal or under when closed Travel length Outer member Inner member Ø4.5X5.3 slot Ø9.5 Access hole Load Rating kg/pair Slide weight kg/pair Part number
Open the catalog to page 13All HepcoMotion catalogs and technical brochures
-
HLG Hepco Linear Ball Guides
17 Pages
-
SBD Sealed Belt Drive
11 Pages
-
MFS machine fencing system
6 Pages
-
HGS gantry solutions
9 Pages
-
HDS2 Heavy Duty Slide System
27 Pages
-
DTS2 Dynamic Track Systems
8 Pages
-
PRT2 No. 2 Installation Details
10 Pages
-
PRT2 No.8 DTS Components
19 Pages
-
PRT2 No. 11 Mix & Match
3 Pages
-
PRT2 1-Trak
8 Pages
-
Floating Bearings
2 Pages
-
DualVee Wash Down Wheels
2 Pages
-
MCS Catalogue
36 Pages
-
Profiles with Linear Guides
8 Pages
-
ALR Aluminium Rings
4 Pages
-
MHD Catalogue
8 Pages
-
PSD80 No.1 Ballscrew
6 Pages
-
HDRT Heavy Duty Ring and Tracks
13 Pages
-
Uni-Guide – Product Overview
4 Pages
-
ZIMM GSZ & Z Series Screw Jacks
196 Pages
Archived catalogs
-
BSP Ballscrew Premier
9 Pages
-
SL2 Stainless Steel Slide System
15 Pages
-
PRT2 No.6 Bleed Lubrication
8 Pages
-
DualVee Technical Data Guide
12 Pages
-
DualVee Guide Wheels Catalogue
11 Pages
-
MCS – RapiLok
2 Pages
-
ZIMM – Z Series Leaflet
4 Pages