Catalogs >
HepcoMotion >
Geared Motors for DLS Linear Transmission

Geared Motors for DLS Linear Transmission
1 / 4Pages

Catalog excerpts

Geared Motors for DLS Linear Transmission - 1

HepcoMotion® New geared motors for DLS linear transmission HepcoMotion® has introduced a new range of AC geared motors and gearboxes to enhance the DLS product. These are available on a short lead time, are very cost effective and are easy to specify. Motors up to 0.55kW are offered as are gearboxes with ratios from 5:1 to 80:1. This provides driving forces to 1020N and linear speeds from zero to 1.86m/s. This addition to the popular DLS range enhances the product and adds to the existing features, just some of which are shown below. For a full list of product features and more technical information please see the full DLS linear transmission and positioning system catalogue. Carriage l Tapped holes for simple component fixing l Removable platform for easy machining l Two carriage plate lengths - long and short l Multiple carriages on a single beam l Integral belt tensioners for ease of adjustment Toothed Belt Drive l High speed & acceleration l Good accuracy AC Geared Motor l Quick selection range, suits most applications l Engineered into unit for strong, compact drive l Good efficiency & accuracy l Optional holding brake on motor l Worm gearbox option to suit customer’s motor V bearing & cap seals l Maintenance free precision motion Rigid Aluminium Beam l Up to 8m in one piece - longer with joints l Lightweight option available on DLS3 l Strong sections span wide gaps l Can be used as construction element of machine V slide l Precision ground HepcoMotion® V sli

Open the catalog to page 1

Geared Motors for DLS Linear Transmission - 2

Data & Dimensions HepcoMotion® offer 3 phase squirrel cage motors in 4 IEC frame sizes 50 to 71, with the choice of short (S) or long (L) field windings and 2 or 4 poles designs (running at approximately 2800 and 1400 rpm respectively). Powers from 45W to 550W are available. Motors are rated at 400/230V, are protected to IP55, and are finished in silver grey epoxy paint as standard. Motors with single and three phase windings, special finishes and enhanced IP ratings are available on request. The gearboxes are available in ratios from 5:1 to 80:1. The gearbox is attached directly to the...

Open the catalog to page 2

Geared Motors for DLS Linear Transmission - 3

Choosing the Right System Quick Selection Range HepcoMotion® has selected a range of AC geared motors that will cover vast majority of applications. Simply select the unit with the suitable nominal speed. These combinations of geared motor will produce the nominal linear force at speeds ranging from 50% to 120% of the nominal speed. The units will perform with a lower force and duty cycle over a much wider speed range from 10% to 200% of the nominal speed. Other motor sizes are available upon request. This selection should be made after reading the section 'How to Select the Right DLS + AC...

Open the catalog to page 3

Geared Motors for DLS Linear Transmission - 4

Ordering Details Fitted Worm Gearbox or AC Geared Motor SW Identifies a fitted worm gearbox Reduction Ratio - Gearbox Position - Choose from 1 - 8 see page 8 for options Input Option - F indicates IEC adapter flange Frame Size - 56 is the frame size of motor or flange Field Length - S identifies short field winding Motor Poles - 2 identifies 2 pole motor (~2800 rpm @ 50Hz) Brake Motor - B indicates that a motor brake is fitted Orientation: choose from A - D Cable Exit Position - M indicates fitted AC motor L identifies long field winding 4 identifies 4 pole motor (~1400 rpm @ 50Hz)...

Open the catalog to page 4