DATA SHEET T102R, network/industrial Time Server Time server / Master Clock, with PoE and advanced Input/Output features Pole Phoenix – 22560 PLEUMEUR BODOU - FRANCE [email protected] © 2018 All Rights Reserved. All specifications subject to change without Notice.

DATA SHEET HEOL-T102 V2: PERFORMANCE and EASY INTEGRATION The T102 module is a server/client SNTP/NTP, able to synchronize automated systems and networks in an industrial environment. This synchronization is done using an Ethernet link (IEC61850), a serial link RS232/RS422 (NMEA with or without pps signal),or an IRIG-B003 optical link. As the T102 doesn’t integrate GPS antenna, you can install it anywhere in your factory or office (it is just necessary to connect it to your network, so it can synchronize to an external NTP server – T101 GPS master clock, or to an external GPS receiver with NMEA...

DATA SHEET Alarm relay is available, for driving your external systems in case of failure of the T102. Alarms are displayed through SNMP traps (Ethernet interface) or through RS232. SNMP can also be used to configure T102 parameters (instead of http web server). IRIG-B003 and B123 outputs available on the I/O connector, as well as sync signals through optic fiber (5 seconds and 1mn pulse synchro). A RS232 or RS422 serial port can be accessed for remote control and monitoring (with NMEA protocol output, and NMEA input for connection to external GPS receiver). Industrial V24 is also available in...

GPS (NMEA) T102 AC/DC Power + PoE mote interface Eventinputs Sync User systems NTP/SNTP (synchro) http (config) SNMP (alarms) SMTP (E-mail) T101 / T116GPS Clock / Time serv1er NTP clients / servers Automated systems T102 synoptic and external links HEOL DESIGN Pole Phoenix - 22560 PLEUMEUR BODOU - FRANCE [email protected] © 2018 All Rights Reserved. All specifications subject to change without Notice.

■ According to v ^ directive, the HEOL-T102 module has passed the following tests : > EN55022/55011 class B : conducted and radiated emissions. > EN61000-4-2: Immunity to electrostatic discharges. > EN61000-4-3: Immunity tests on electromagnetic fields radiated at radio-electrical frequencies, with 10V/m electromagnetic field. > EN61000-4-4: Immunity to rapid transients. > EN61000-4-6: Immunity tests on conducted interference, induced by radio-electrical fields. HEOL DESIGN Pole Phoenix - 22560 PLEUMEUR BODOU - FRANCE [email protected] © 2018 All Rights Reserved. All specifications subject...

DATA SHEET EN61000-4-8: Immunity to Power frequency magnetic field (30 A/m) EN61000-4-11: Voltage dips, short interruptions and voltage variations immunity tests. Compliance with the International Safety Standard for Information Technology (IEC/EN 60950). The HEOL-T102 module is RoHS (lead free) compliant. 3&4 pins : Alarm relay or PPS/TOP output on Static relay (option PPSREL) 1&2 pins : Event input #1 5&6 pins : PPS/TOP RS422 output or IRIG B003 output (option IRIG) or Event input #2 (option EVENT2) Pole Phoenix – 22560 PLEUMEUR BODOU - FRANCE [email protected] © 2018 All Rights Reserved....

ORDERING PART NUMBER DC/POE: DC+Power Ethernet AC : 110 to 250V (Rack only) • I/O option I/O connector mounted _ • OCXO option - • RTC option, battery powered : for fast start without GPS satellites If other options are needed, just add the part number of these options at the end of the T102 part number : -422 for RS422 serial port instead of RS232 -EVENTx for additional Event input(s) -IRIG-xisc : for x optical input(s) with IRIG-B003 signal -IRIG-i : for electrical isolated DC-shift IRIG input (IRIG-B003 signal) -IRIG-im : for electrical isolated amplitude modulated IRIG input (IRIG-B123 signal)...