DATA SHEET T116, Time server 20 channels Event recorder IRIG & Pulse generator Fiber Optic outputs GPS disciplined Time Station, 20 events isolated inputs, IRIGB003, IRIGB123 and pulse generator, with isolated or optical outputs -Static and Mobile applications- 1 Bd d’Armor – 22300 LANNION - FRANCE [email protected] 1 © 2015 All Rights Reserved. All specifications subject to change without Notic

The T116-FO time server is a time server, synchronized to GPS, providing the following functions : - NTP/SNTP server, broadcast and unicast modes. - IRIG modulated (B123) and un-modulated (B003) generator, available on BNC connector, optical port (SC connector), or isolated output. Coupled with the T047 optical/IRIG transceiver, you will have the ability to synchronize distant IRIG clients, linked to T116-FO server by an optical fiber (up to 2 km). - Programmable pulse generator, (up to 6 isolated, high current capacity outputs). Outputs are available on fast static relay, 5V, or differential...

DATA SHEET The T116 provides Ethernet interface, for configuration via web server, automatic E-mails, SNMP access; Ethernet provides also accurate timing information trough the SNTP/NTP protocol. Thanks to its self-survey mode, the accuracy of the timestamp (compliant with SNTP protocol) is better than ±200 nanoseconds for the receive packet and ±600 nanoseconds for the transmit packet - reference is UTC atomic clock. If the satellites signals are completely lost, the hold-over mode enables the module to keep an accurate timing reference, with a maximum drift of 500µs/day (with OCXO option)....

DATA SHEET RTC Clock generator OCXO/TCXO Remote interface +NMEA Event inputs External Events TOP/pps /IRIG/ 10MHz Sync outputs NTP/SNTP (synchro and events) http (config) SNMP (alarms and events) SMTP (E-mail) Automated systems T116 synoptic and external links 1 Bd d’Armor – 22300 LANNION - FRANCE [email protected] 4 © 2015 All Rights Reserved. All specifications subject to change without Notic

1 Bd d'Armor - 22300 LANNION - FRANCE [email protected] 5 © 2015 All Rights Reserved. All specifications subject to change without Notice.

■ According to v ^ directive, the HEOL-T116x module has passed the following tests : > EN55022/55011 class B : conducted and radiated emissions. > EN61000-4-2: Immunity to electrostatic discharges. > EN61000-4-3: Immunity tests on electromagnetic fields radiated at radio-electrical frequencies, with 10V/m electromagnetic field. > EN61000-4-4: Immunity to rapid transients. > EN61000-4-5: Immunity to surge. > EN61000-4-6: Immunity tests on conducted interference, induced by radio-electrical fields. > EN61000-4-8: Immunity to Power frequency magnetic field (30 A/m) > EN61000-4-11: Voltage dips,...

DATA SHEET T116 with IRIG Fiber Optic outputs, rear view 3&4 pins : Alarm relay 1&2 pins : Event input channel1 5&6 pins : PPS/TOP RS422 output channel 1 T116 factory default I/O connections 1 Bd d’Armor – 22300 LANNION - FRANCE [email protected] 7 © 2015 All Rights Reserved. All specifications subject to change without Notic

ORDERING PART NUMBER • Power DC : 14 to 60V DC/POE: DC+Power Ethernet AC : 110 to 250V AC/POE: AC+Power Ethernet • FLASH option : 128M flash _ memory to store Event data • OCXO option OCXOSR : standard (0 / +50°C) OCXOMR : medium (-20 / +65°C) OCXOHR : high (-40 / +70°C) • RTC option : for fast start without GPS satellites • DST option : Local Time and Daylight Saving Time management For the I/O options, just add the part number of these options at the end of the T116 part number : -xEVENT for Event input (x = 1 to 20); on I/O connector -xIRIG003 for IRIG-B003 output (x = 1 to 7) ; on I/O connector -xIRIG003b...

DATA SHEET Annex : Example of use of T116 Event inputs for seismic impact measurement. seismic sensors Control room Data centre/ calculator 1 Bd d’Armor – 22300 LANNION - FRANCE [email protected] 9 © 2015 All Rights Reserved. All specifications subject to change without Notic