*mydirectindustry

Catalogs
heol design
T116 GPS clock, Event recorder, IRIG generator

T116 GPS clock, Event recorder, IRIG generator

Product catalog summary

Introduction
The T116-FO is a GPS-synchronized time server offering multiple functionalities including NTP/SNTP server capabilities, IRIG modulated and un-modulated signal generation, and a programmable pulse generator. It supports both static and mobile applications and can synchronize distant IRIG clients via optical fiber.

Specifications
The T116-FO features a 12-channel GPS receiver with high sensitivity and accuracy. It provides Ethernet interface for configuration and monitoring, and supports SNTP/NTP protocols for precise timing. The device maintains accuracy even in poor signal conditions and offers a hold-over mode with minimal drift when GPS signals are lost.

Interfaces and Connectivity
The device includes various interfaces such as Ethernet, RS232/RS422, and supports Power over Ethernet (PoE). It also features multiple output options for IRIG and pulse signals, with configurations available for different voltage levels and relay types.

Environmental and Compliance
The T116-FO operates across a wide temperature range and is compliant with several international standards for emissions and immunity. It is also RoHS compliant, ensuring it is lead-free.

Ordering Information
Various configurations are available based on power supply, flash memory, oscillator type, and additional options for event inputs and outputs. Customers can customize the device to meet specific requirements by selecting from a range of options.

Applications
An example application includes using the T116 for seismic impact measurement, demonstrating its versatility in different monitoring and synchronization scenarios.

Catalog excerpts

T116 GPS clock, Event recorder, IRIG generator-1

DATA SHEET T116, Time server 20 channels Event recorder IRIG & Pulse generator Fiber Optic outputs GPS disciplined NTP server, 20 events isolated channels, IRIGB003, IRIGB123 and pulse generator, with isolated or optical outputs -Static and Mobile applications- 1 Bd d’Armor – 22300 LANNION - FRANCE [email protected] 1 © 2015 All Rights Reserved. All specifications subject to change without Notice.

Open the catalog to page 1

T116 GPS clock, Event recorder, IRIG generator-2

DATA SHEET The T116-FO time server is a time server, synchronized to GPS, providing the following functions : NTP/SNTP server, broadcast and unicast modes. IRIG modulated (B123) and un-modulated (B003) generator, available on BNC connector, optical port (SC connector), or isolated output. Coupled with the T047 optical/IRIG transceiver, you will have the ability to synchronize distant IRIG clients, linked to T116-FO server by an optical fiber (up to 2 km). Programmable pulse generator, (up to 6 isolated, high current capacity outputs). Outputs are available on fast static relay, 5V, or differential...

Open the catalog to page 2

T116 GPS clock, Event recorder, IRIG generator-3

DATA SHEET The T116 provides Ethernet interface, for configuration via web server, automatic E-mails, SNMP access; Ethernet provides also accurate timing information trough the SNTP/NTP protocol. Thanks to its self-survey mode, the accuracy of the timestamp (compliant with SNTP protocol) is better than ±200 nanoseconds for the receive packet and ±600 nanoseconds for the transmit packet - reference is UTC atomic clock. If the satellites signals are completely lost, the hold-over mode enables the module to keep an accurate timing reference, with a maximum drift of 500µs/day (with OCXO option)....

Open the catalog to page 3

T116 GPS clock, Event recorder, IRIG generator-4

DATA SHEET RTC Clock generator OCXO/TCXO Remote interface +NMEA Event inputs External Events TOP/pps /IRIG/ 10MHz Sync outputs NTP/SNTP (synchro and events) http (config) SNMP (alarms and events) SMTP (E-mail) Automated systems T116 synoptic and external links 1 Bd d’Armor – 22300 LANNION - FRANCE [email protected] 4 © 2015 All Rights Reserved. All specifications subject to change without Notice.

Open the catalog to page 4

T116 GPS clock, Event recorder, IRIG generator-5

DATA SHEET Type Sensitivity Position Accuracy Time Accuracy (pps) 12 channels -155dBm <2.5 meters ±100 ns (static) ±200 ns (mobile) Cold start (Time to First Fix) < 39 seconds (90%) Warm up time < 1 minute Self survey mode 24 hours (with OCXO) Active antenna voltage 5V Timing Ethernet protocol Power supply Input Voltage SNTP V4, Broadcast/Unicast (100 requests per second maximum) Configuration / monitoring http server or SNMP manager Absolute timestamp error ±200ns for Rx (1µs version) (refer to UTC time) ±600ns for Tx (1µs version) Timestamp drift when Standard TCXO option: 200µs/hour synchronization...

Open the catalog to page 5

T116 GPS clock, Event recorder, IRIG generator-6

-depth with SMA connector 130 mm -depth with N connector 150 mm_ ■ According to ^ ^ directive, the HEOL-T116x module has passed the following tests : > EN55022/55011 class B : conducted and radiated emissions. > EN61000-4-2: Immunity to electrostatic discharges. > EN61000-4-3: Immunity tests on electromagnetic fields radiated at radio-electrical frequencies, with lOV/m electromagnetic field. > EN61000-4-4: Immunity to rapid transients. > EN61000-4-6: Immunity tests on conducted interference, induced > EN61000-4-8: Immunity to Power frequency magnetic field (30 > EN61000-4-11: Voltage dips, short...

Open the catalog to page 6

T116 GPS clock, Event recorder, IRIG generator-7

DATA SHEET T116 with IRIG Fiber Optic outputs, rear view 3&4 pins : Alarm relay 1&2 pins : Event input channel1 5&6 pins : PPS/TOP RS422 output channel 1 T116 factory default I/O connections 1 Bd d’Armor – 22300 LANNION - FRANCE [email protected] 7 © 2015 All Rights Reserved. All specifications subject to change without Notice.

Open the catalog to page 7

T116 GPS clock, Event recorder, IRIG generator-8

DATA SHEET ORDERING PART NUMBER T116-1µs-DC-FLASH-OCXOSR-RTC-DST • TimeStamp 1µs accuracy 10µs 100µs 1ms • Power DC : 14 to 60V DC/POE: DC+Power Ethernet AC : 110 to 250V • FLASH option : 128M flash memory to store Event data • OCXO option OCXOSR : standard (0 / +50°C) OCXOMR : medium (-20 / +65°C) OCXOHR : high (-40 / +70°C) • RTC option : for fast start without GPS satellites DST option : Local Time and Daylight Saving Time management For the I/O options, just add the part number of these options at the end of the T116 part number : -xEVENT for Event input (x = 1 to 20) -xIRIG003 for IRIG-B003...

Open the catalog to page 8

T116 GPS clock, Event recorder, IRIG generator-9

DATA SHEET Annex : Example of use of T116 Event inputs for seismic impact measurement. seismic sensors Control room Data centre/ calculator 1 Bd d’Armor – 22300 LANNION - FRANCE [email protected] 9 © 2015 All Rights Reserved. All specifications subject to change without Notice.

Open the catalog to page 9

All Heol design catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list