DATA SHEET T107, Rubidium NTP clock, GPS disciplined Ultra-low drift (1µs/day) NTP clock, with advanced Input/Output synchronization features. 1 bd Armor – 22300 LANNION - FRANCE [email protected] © 2015 All Rights Reserved. Specifications subject to change without notice.

HEOL-T107: PERFORMANCE and EASY INTEGRATION The T107 Time server / Rubidium Clock has been designed to provide highly accurate timing information trough an Ethernet link (using NTP/SNTP protocol), for network synchronization and measurement applications, without the need to be connected to external Network, hence preserving your Network Based on a high performance GPS chipset (with -160dBm sensitivity and T-RAIM to provide high integrity of the pps and timebase), it delivers accurate timing information, even in poor signal level conditions (indoor, urban canyons and signal obscured environments)....

Automatic E-mails can be sent by the HEOL-T107, periodically or when alarms appear. This function is fully configurable via the http Objet : TIO 1 NTP Server Status Report : IP : 192.168. 1.100 MAC : 00 - LF-77-O l-O l-OZ TlOl OK. SeJ_f—smvev active . A 2500V isolated event input allows you to time-stamp events from external systems, with very high accuracy (±100 nanoseconds, refer to UTC atomic clock). The TimeStamp information is reported through RS232, SNMP trap, E-mail or Broadcast frame. Alarm relay is available, for driving your external systems in case of failure of Alarms are displayed...

DATA SHEET GPS antenna Remote interface +NMEA Clock generator RUBIDIUM Event inputs External Events Sync outputs User systems NTP/SNTP (synchro and events) http (config) SNMP (alarms and events) SMTP (E-mail) Automated systems T107 synoptic and external links 1 bd Armor – 22300 LANNION - FRANCE [email protected] © 2015 All Rights Reserved. Specifications subject to change without notice.

DATA SHEET Sensitivity (Tracking) Sensitivity (Acquisition) Time Accuracy (pps) Warm up time Active antenna voltage Timing Generator Timing Ethernet protocol Configuration / monitoring Absolute timestamp error (refer to UTC time) Timestamp drift when synchronization lost RTC Power supply Input Voltage Power consumption GPS Active antenna Ethernet link Remote RS232 / RS422 pps output Alarm Relay Event input -160dBm -155dBm 15 ns (1 σ) < 15 minutes for full accuracy ~ 24 hours for self-survey mode 5V SNTP V4, NTP Broadcast/Unicast (100 requests per second maximum) http server or SNMP manager ±200ns...

DATA SHEET According to directive, the HEOL-T107 module has passed the following tests : EN55022/55011 class B : conducted and radiated emissions. EN61000-4-2: Immunity to electrostatic discharges. EN61000-4-3: Immunity tests on electromagnetic fields radiated at radio-electrical frequencies, with 10V/m electromagnetic field. EN61000-4-4: Immunity to rapid transients. EN61000-4-5: Immunity to surge. EN61000-4-6: Immunity tests on conducted interference, induced by radio-electrical fields. EN61000-4-8: Immunity to Power frequency magnetic field (30 A/m) EN61000-4-11: Voltage dips, short interruptions...

DATA SHEET 3&4 pins : Alarm relay or PPS/TOP output on Static relay (option PPSREL) 1&2 pins : Event input #1 5&6 pins : PPS/TOP RS422 output or IRIG B003 output (option IRIG) or Event input #2 (option EVENT2) 1 bd Armor – 22300 LANNION - FRANCE [email protected] © 2015 All Rights Reserved. Specifications subject to change without notice.

DATA SHEET ORDERING PART NUMBER • I/O option I/O connector mounted (blank : not mounted) • Battery powered RTC option : for fast start without GPS satellites If other options are needed, just add the part number of these options at the end of the T107 part number : -422 for RS422 serial port instead of RS232 -EVENT2 for secondary Event input -IRIG for IRIG-B003 output -PPSREL for PPS/TOP output on fast static relay -N or TNC connector option 1 bd Armor – 22300 LANNION - FRANCE [email protected] © 2015 All Rights Reserved. Specifications subject to change without notice.