DATA SHEET Time server / GPS Primary Clock, with PoE and advanced Input/Output features - Mobile Applications, down to -40°C - Note : Heol Design is not responsible for the operation or failure of operation of GPS satellites or the availability of GPS satellite signals. 1 Bd d’Armor – 22300 LANNION - FRANCE [email protected] 1 © 2015 All Rights Reserved. All specifications subject to change without Notice.

HEOL-T103 : PERFORMANCE and EASY INTEGRATION The T103 server has been designed to provide accurate timing information trough an Ethernet link, for Network synchronization and measurement applications, without the need to be connected to external Network, hence preserving your Network insulation. It can be used in both static and mobile Based on a high performance 12 channels GPS chipset (with -160dBm sensitivity), it delivers accurate timing information, even in poor signal level conditions (indoor, urban canyons and signal obscured environments). The antenna (protected against short-circuit)...

DATA SHEET A web server with secure access allows you to configure the T103, and monitor its status at a glance (GPS satellites strength signals, Ethernet connections, alarms, input/outputs…). Automatic E-mails can be sent by the T103, periodically or when alarms appear. This function is fully configurable via the http server. A 2500V isolated event inputs allows you to time-stamp external events with very high accuracy (±100 nano-seconds , refer to UTC atomic clock). The TimeStamp information is report through RS232/RS422, SNMP trap, Email or Broadcast frame). A second event input is available...

DATA SHEET T103 RTC+ battery Clock generator OCXO/TCXO Remote interface +NMEA or TSIP Event inputs External Events TOP/pps /IRIG Sync outputs NTP/SNTP (synchro and events) http (config) SNMP (alarms and events) SMTP (E-mail) Automated systems T103 synoptic and external links 1 Bd d’Armor – 22300 LANNION - FRANCE [email protected] 4 © 2015 All Rights Reserved. All specifications subject to change without Notice.

DATA SHEET Type Sensitivity Position Accuracy Time Accuracy (pps) 12 channels -160dBm <2.5 meters ±100 ns (static) ±200 ns (mobile) Cold start (Time to First Fix) < 39 seconds (90%) Warm up time < 1 minute Self survey mode 24 hours (with OCXO) Active antenna voltage 5V Timing Generator Timing Ethernet protocol Power supply Input Voltage SNTP V4, Broadcast/Unicast (100 requests per second maximum) Configuration / monitoring http server or SNMP manager Absolute timestamp error ±200ns for Rx (1µs version) (refer to UTC time) ±600ns for Tx (1µs version) Timestamp drift when Standard TCXO option:...

-depth with SMA connector 130 mm -depth with N connector 150 mm According to C € directive, the T103 module has passed the following > EN55022/55011 class B : conducted and radiated emissions. > EN61000-4-2: Immunity to electrostatic discharges. > EN61000-4-3: Immunity tests on electromagnetic fields radiated at radio-electrical frequencies, with lOV/m electromagnetic field. Immunity to rapid transients. Immunity tests on conducted interference, induced > EN61000-4-8: Immunity to Power frequency magnetic field (30 > EN61000-4-11: Voltage dips, short interruptions and voltage variations immunity...

DATA SHEET T103 19’’ 1U Rack rear view (with ‘N’ antenna connector) 3&4 pins : Alarm relay or PPS/TOP output on Static relay (option PPSREL) 1&2 pins : Event input #1 5&6 pins : PPS/TOP RS422 output or IRIG B003 output (option IRIG) or Event input #2 (option EVENT2) 1 Bd d’Armor – 22300 LANNION - FRANCE [email protected] 7 © 2015 All Rights Reserved. All specifications subject to change without Notice.

DATA SHEET ORDERING PART NUMBER T103R-10µs-AC-I/O-OCXOSR-RTC • Housing R: 19’’Rack C: Compact • NTP accuracy • Power DC : 14 to 60V DC/POE: DC+Power Ethernet AC : 110 to 250V (Rack only) • I/O option I/O connector mounted (blank : not mounted) • OCXO option OCXOSR : standard (0 / +50°C) OCXOMR : medium (-20 / +65°C) OCXOHR : high (-40 / +70°C) • RTC option : for fast start without GPS satellites If other options are needed, just add the part number of these options at the end of the T103 part number : -422 for RS422 serial port instead of RS232 -EVENT2 for secondary Event input -IRIG for IRIG-B003...