1. Catalogs
  2. heol design
  3. T103 - GPS clock for mobile applications

T103 - GPS clock for mobile applications

T103 - GPS clock for mobile applications

T103 - GPS clock for mobile applications

Product catalog summary
Overview: The T103 Time Server by Heol Design is a GPS-based primary clock designed for network synchronization and measurement applications. It features Power over Ethernet (PoE) and advanced input/output capabilities, suitable for both static and mobile applications, even in extreme temperatures down to -40°C.
Performance and Integration: The T103 utilizes a high-performance 12-channel GPS chipset with -160dBm sensitivity, ensuring accurate timing even in poor signal conditions. It supports both static and mobile applications, with a warm-up time of less than one minute. The server maintains network insulation by not requiring an external network connection.
Accuracy and Features: The T103 provides timestamp accuracy better than ±200 nanoseconds for receive packets and ±600 nanoseconds for transmit packets. In the event of GPS signal loss, the hold-over mode maintains accuracy with a drift of less than 1ms/day using the OCXO option. The server can be configured and monitored via a secure web server, with automatic email alerts for alarms.
Interfaces and Options: The T103 offers various interfaces including RS232/RS422, SNMP, and Ethernet. It supports optional features like a battery-powered RTC for timing without GPS, IRIG-B003 output, and a highly accurate PPS signal. The server is available in compact or rack-mounted forms, with dual Ethernet ports in the rack version.
Specifications: The GPS receiver has a sensitivity of -160dBm and a position accuracy of less than 2.5 meters. The timing generator supports SNTP V4 protocol, with configuration via HTTP or SNMP. Power options include PoE, DC, and AC, with power consumption varying by model and options.
Environmental and Compliance: The T103 operates in temperatures from -40°C to +85°C and is compliant with various international standards for emissions, immunity, and safety, including RoHS compliance.
Ordering Information: The T103 is customizable with options for housing, NTP accuracy, power supply, I/O connectors, OCXO options, and additional features like RS422, secondary event input, and IRIG output.
See more

Catalog excerpts

T103 - GPS clock for mobile applications-1

DATA SHEET Time server / GPS Primary Clock, with PoE and advanced Input/Output features - Mobile Applications, down to -40°C - Note : Heol Design is not responsible for the operation or failure of operation of GPS satellites or the availability of GPS satellite signals. Pole Phoenix – F-22560 PLEUMEUR BODOU [email protected] 1 © 2021 All Rights Reserved. All specifications subject to change without Notice

 Open the catalog to page 1
T103 - GPS clock for mobile applications-2

DATA SHEET HEOL-T103 : PERFORMANCE and EASY INTEGRATION The T103 server has been designed to provide accurate timing information trough an Ethernet link, for Network synchronization and measurement applications, without the need to be connected to external Network, hence preserving your Network insulation. It can be used in both static and mobile applications. Based on a high performance 12 channels GPS chipset (with -160dBm sensitivity), it delivers accurate timing information, even in poor signal level conditions (indoor, urban canyons and signal obscured environments). The antenna (protected...

 Open the catalog to page 2
T103 - GPS clock for mobile applications-3

DATA SHEET A web server with secure access allows you to configure the T103, and monitor its status at a glance (GPS satellites strength signals, Ethernet connections, alarms, input/outputs…). Automatic E-mails can be sent by the T103, periodically or when alarms appear. This function is fully configurable via the http server. A 2500V isolated event inputs allows you to time-stamp external events with very high accuracy (±100 nano-seconds , refer to UTC atomic clock). The TimeStamp information is report through RS232/RS422, SNMP trap, Email or Broadcast frame). A second event input is available...

 Open the catalog to page 3
T103 - GPS clock for mobile applications-4

DATA SHEET T103 RTC+ battery Clock generator OCXO/TCXO Remote interface +NMEA or TSIP Event inputs External Events TOP/pps /IRIG Sync outputs NTP/SNTP (synchro and events) http (config) SNMP (alarms and events) SMTP (E-mail) Automated systems T103 synoptic and external links Pole Phoenix – F-22560 PLEUMEUR BODOU [email protected] 4 © 2021 All Rights Reserved. All specifications subject to change without Notice.

 Open the catalog to page 4
T103 - GPS clock for mobile applications-5

Pole Phoenix - F-22560 PLEUMEUR BODOU [email protected] 5 HEOL DESIGN © 2021 All Rights Reserved. All specifications subject to change without Notice.

 Open the catalog to page 5
T103 - GPS clock for mobile applications-6

■ According to ^ v, directive, the T103 module has passed the following tests : > EN55022/55011 class B : conducted and radiated emissions. > EN61000-4-2: Immunity to electrostatic discharges. > EN61000-4-3: Immunity tests on electromagnetic fields radiated at radio-electrical frequencies, with 10V/m electromagnetic field. > EN61000-4-4: Immunity to rapid transients. > EN61000-4-6: Immunity tests on conducted interference, induced by radio-electrical fields. > EN61000-4-8: Immunity to Power frequency magnetic field (30 A/m) > EN61000-4-11: Voltage dips, short interruptions and voltage variations...

 Open the catalog to page 6
T103 - GPS clock for mobile applications-7

DATA SHEET T103 19’’ 1U Rack rear view (dual Ethernet version) 3&4 pins : Alarm relay or PPS/TOP output on Static relay (option PPSREL) 1&2 pins : Event input #1 5&6 pins : PPS/TOP RS422 output or IRIG B003 output (option IRIG) or Event input #2 (option EVENT2) Pole Phoenix – F-22560 PLEUMEUR BODOU [email protected] 7 © 2021 All Rights Reserved. All specifications subject to change without Not

 Open the catalog to page 7
T103 - GPS clock for mobile applications-8

ORDERING PART NUMBER Housing R: 19''Rack C: Compact R2: Rack with dual Eth DC/POE: DC+Power Ethernet AC : 110 to 250V (Rack only) • I/O option I/O connector mounted _ • OCXO option _ OCXOSR : standard (0 / +50°C) OCXOMR : medium (-20 / +65°C) OCXOHR : high (-40 / +70°C) • RTC option : for fast start without GPS satellites If other options are needed, just add the part number of these options at the end of the T103 part number : -422 for RS422 serial port instead of RS232 -EVENT2 for secondary Event input -PPSREL for PPS/TOP output on fast static relay -N or TNC connector option (N only for rack)...

 Open the catalog to page 8
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.