N101 Ruggedized Low Power GPS/ Multi-GNSS receiver AUTOMOTIVE GRADE (ISO7637) GPS/Multi-GNSS NAVIGATION MODULE WITH HIGH SENSITIVITY The specifications in this document are subject to change without Notice. Heol Design is not responsible for the operation or failure of operation of GPS satellites or the availability of GPS satellite signals. 1 Bd d’Armor – 22300 LANNION - FRANCE Call : +33 (0)296 484 605 E-mail : [email protected]

The HEOL-N101 has been designed to provide accurate and reliable navigation information trough a RS232 link. Based on a high performance GPS or GNSS (GPS+GLONASS/GALILEO/BEIDOU/QZSS) chipset, it delivers accurate position information, even in poor signal level environments (tree foliage, urban canyons). Performance ■ Very-high sensitivity of -165dBm, enabling high performance in low level signals environments. Supports SBAS satellite system, for improved position accuracy. ■ Time to get first fix information is around 38s (cold start), and 1 second in hot start. ■ 2 RS232 or 1 RS422 serial ports...

SPECIFICA TIONS: GPS L1 Receiver *Aerial field cleared ** With optional capacitor, hot start can be slower between -20°C and -40°C HEOL DESIGN 1 Bd d'Armor - 22300 LANNION - FRANCE Call : +33 (0)296 484 605 E-mail : [email protected]

~NAV series HEOL DESIGN O ( 9~8 7 6 |^RS232/422GPS Antenna SUB-D9 Status LEDs Fakra connector HEOL DESIGN 1 Bd d'Armor - 22300 LANNION - FRANCE Call : +33 (0)296 484 605 E-mail : [email protected]

In RS422, here is the associated pinning : Connecting the GPS/GNSS antenna On the antenna connector, connect a 3V or 5V active antenna. This input is protected against short circuit that could occur on the antenna cable. By default the N101 is configured for a 5V active antenna. To use a 3V active antenna, you must open the cover and move the switch near main power connector. Connecting the host system and the power Power should be applied : o Aux power plug. The connector type is AMP connector (ref 176271), included in the package. Contact HEOL DESIGN for AC adapter availability. o OR on pin6...

MECHANICAL DRAWINGS Antenna voltage selector (inside) 5V - 3,3V Power ORDERING PART NUMBER HEOL-N101-P-2321-F-A-C-Px Receiver type: • P: GPS • N: GNSS Serial interface: • 2321 : 1 port RS232 • 2322 : 2 ports RS232 • 422 : 1 port RS422 Antenna connector: • F : SMB Fakra (default) • A : SMA • B : SMB • X : MCX Optional PPS (leave blank if not required) : • P0 : RS232 * • P1 : 5V TTL • P2 : RS422 * Optional Backup capacitor for hot start (leave blank if not required) Input Voltage grade: • A : 9V - 28V automotive • I : 9V- 50V industrial *: P0 and P2 options not available with 2 ports RS232 1 Bd...