HEOL DESIGNN0xx, improved replacement GPS receivers : clones for Trimble iQ, SQ, SK2, LP, ACE II/IIIN016HEOL DESIGN P/N : N016-V1 -HS HEOL DESIGN

BEST PERFORMANCE HEOL DESIGN is the first company to produce Trimble GPS receiver clone boards, which are based on the Copernicus II high performance GPS chip set. These OEM board are designed for use in embedded and industrial applications requiring high accuracy positioning and timing information. They can also be used as a replacement and upgrade for users of the Trimble Lassen iQ, SQ, LP, SK2 and ACE (ACEII, ACEIII) receiver boards, which are now EOL (end of life). The N0xx (except N016 - iQ and SQ replacement boards), have an additional feature: thanks to a switch, you can select the active...

EMC compatibility The HEOL-NOxx boards have successfully completed compliance testing against the following standards listed below: (In accordance with the C€ directive). > EN55022 class B (conducted and radiated emissions) dated January 1999, with 10dB margin. > EN61000-4-3 published in 2002: "Immunity tests on electromagnetic fields radiated at radio-electrical frequencies", with 10V/m electromagnetic field. > EN61000-4-6 published in February 1997: "Immunity tests on conducted interference, induced by radio-electrical fields". > EN61000-4-4 (Immunity to rapid transients) dated June 1995, with...

Ordering part numbers Lassen SK2 replacement board: N011-V1-B with parity 'none' N021-V1-B with parity 'odd' Lassen LP replacement board: N013-V1-X C ACEII / ACEIII replacement board: N014-V1-B with parity 'none' N024-V1-B with parity 'odd' For these 3 part numbers : Antenna connector: • B : SMB (default) • A : SMA • X : MCX • F : Fakra SMB C : Optional BackUp Battery Capacitor (leave blank if not required) Lassen iQ / SQ replacement board: N016-V1-H C R Antenna connector: • H : Hirose HFL (default) • A : SMA on cable Fixing pins: • R : Right angle (default) • S : Straight C : Optional on board...