GPS/GNSS/Beacon Ex-d active antenna IECEx certified Explosion-proof Zone 1/21 - 2/22 • Explosion-proof, flameproof and waterproof, corrosion-resistant housing filtering for harsh RF jamming environments • Proven extra rugged, reliable • Cable with TNC or N end-connector provided with any cable length (Zero Halogen), Ultra-Flex in option • Additional MSK Beacon: 283.5 - 325.0 kHz version • Additional Trimble Acutime version (360 or 720) with NMEA and TSIP output • Standard or sub-centimeter accuracy versions • Optional pole mounting available (50cm height or custom size) Pole Phoenix - 22560 PLEUMEUR BODOU- FRANCE Call: +33 (0)296 484 605 - E-mail: [email protected] Copyright 2025 All Rights Reserved

Labeling Certificate number : IECEx PCET 22.0010X Ex db IIC T6 Gb Ex db IIB+H2 T6 Gb Ex tb IIIC T80℃ Db IP66 IIC: -40℃≤Ta≤+55℃ IIB+H2: -60℃≤Ta≤+55℃ Product brief Heol Design has designed a performing Ex-d GNSS antenna, for systems requiring high performance in Ex zones 1/21 and 2/22 offshore environments. Whatever the environment, this GNSS antenna will provide, year after year a perfect solution for fixed-site, rooftop, GNSS Timing/positioning systems. The antenna is housed in a flameproof box designed to withstand exposure to corrosion (use of aluminum marine resistant and anti-corrosive polyester...

Environmental characteristics Ambient Operating Temperature (*) : Add '-50' at the end of the part number for adding a 50m cable (or other desired length) Add '-N' at the end of the part number for adding a N-type coax bushing Add '-B' at the end of the part number for adding breather on bottom side, to avoid internal condensation in case of excessive heat/sun. ^ Breather option on bottom side The specifications in this document are subject to change without notice.Heol Design is not responsible for the operation or failure of operation of GPS/GNSS satellites or the availability of GPS/GNSS satellite...

Mechanical: Safety and Maintenance Instruction This Safety Instruction is meant for skilled electricians and instructed personnel in accordance with national legislation, including the relevant standards and, where applicable, in accordance with IEC 60079-17 on electrical apparatus for explosive atmosphere. Read carefully this instruction before installation or maintenance. 1. Ex d Antenna must be installed and maintained in accordance with all standards regarding electrical installations in hazardous areas classified for explosive gas and/or dust atmospheres. 2. Avoid any dust accumulation....

12. After each opening of the globe (at least once a year for inspection) the plain joints and bolts have to be cleaned and spread with silicone grease to guarantee explosion safety and mentioned IP protection. To open the globe, just remove locking screw and rotate the globe counter-clockwise. To mount the globe, rotate it clockwise and replace the locking screw. Do not use excessive force or tools to unmount/mount the globe, the rotation has to be easy and smoothly, only by hand force. Be sure that the globe is mounted completely to the surface of the Ex d antenna. 13. Tightness of the cable...