HENNLICH Engineering TANKER LOADING SPOUTS DESCRIPTION telescopic loading spout for dust-free loading of dry, dusty bulk solids into tankers with built-in filter OPERATION QUALITIES • max. flow rate 250 m3/h • particle size 0-40 mm • operating temperature -20 °C / +80 °C • motor drive 0.55 kW • built-in filter: flow rate 900 m3/h, fan 1.5 kW, filter area 17.5 m2, residual concentration at the output < 10 mg/m3 • internal thread G ^“ • loading conduit consisting of internal cones and double bellows DESIGN • electric winch with limit switches for highest and lowest position, emergency sensors for highest and lowest positions • terminal box for cable connection • level switch - rotary / vibrating / capacitance type • bottom closing cone to prevent any spillage of dust as the loading spout is being raised ADDITIONAL ACCESSORIES • electric control box • pendant or remote control • vibration unit • shut off valves (manual, electro, pneumatic) • design for ATEX / non-standard temperature (-40 °C / +250 °C) Lmin (rectracted lenght) Telescopic loading spout type NZUF300E with the powerful built-in filter, integral closure cone and level indicator guarantees you a dustless loading of dry, dusty bulk solids into the tankers, railway vehicles or containers. o. z. HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineerin

TANKER LOADING SPOUTS o. z. HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennlich