HENNLICH Engineering TRUCK/RAILCAR LOADING SPOUTS DESCRIPTION • telescopic loading spout for dust-free loading of dry, dusty bulk solids on trucks and railcars OPERATION QUALITIES • max. flow rate 400 m3/h • particle size 0-80 mm • operating temperature -20 °C / +80 °C • motor drive 1.5 kW • loading conduit consisting of internal telescopic tubes and outer bellows • built-in filter, flow rate 1800 m3/h, fan 2.2 kW, filter area 17.5 m2, residual concentration at the output < 10 mg/m3, compressed air min. 5 bar, internal thread G ^“ DESIGN • electric winch with limit switches for highest and lowest position, emergency sensors for highest and lowest positions • terminal box for cable connection • level switch - rotary / vibrating • dustproof bell with rubber skirt at the lower end of the loading spout ADDITIONAL ACCESSORIES • electric control box • pendant or remote control • vibration unit • shut off valves (manual, electro, pneumatic) • design for ATEX • non-standard temperature (-40 °C / +250 °C) Telescopic loading spout type NZOF400E with the powerful built-in filter, dustproof bell with rubber skirt and level indicator guarantee you a dustless loading of dry, dusty bulk solids on trucks or railway cars. o. z. HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineer

TRUCK/RAILCAR LOADING SPOUTS o. z. HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: [email protected]