1. SILO VENTING FILTERS (N-SERIES) 1.5. TYPE N1000 DESCRIPTION * silo venting filter N1000 is a cylindrically shaped dust collector for dedusting of pneumatically filled silos OPERATION QUALITIES • air volume 1000 m3/h • filtration area 15 m2 • residual dust concentration at the output <10 mg/m3 • temperature resistance -20 °C / +80 °C • compressed air needed 6 bar, consumption 6 Nm3/h • pressure loss 1500 Pa • weight: 102 kg DESIGN • carbon steel construction • dustcollectorbodydiameter600 mm * filtered air blows away through the hole between casing and top cover • filterelement: lx filter cartridge made of polyester in basic design diameter 325 mm, lenght 1000 mm • air tankwith JET-PULS filter cartridges recovery and timer • compressed air inlet: internal thread G ^“ • pulse and safety valves, pressure regulator ADDITIONAL ACCESSORIES • ATEX version • non-standard temperature design -40 °C/+150°C BENEFITS • robust design • easy filter element replacement • low dust emission level • excellent access to every filter component Silo venting filter N1000 is a cylindrically shaped dust collector. It is mainly used for dedusting of pneumatically filled silos. DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineeHng.com, e-mail: engine

DUST COLLECTORS 1. SILO VENTING FILTERS (N-SERIES) 1.5. TYPE N1000 DIVISION HENNLICH ENGINEERING , HENNLICH s.r.o. • Litomerice 412 01, Czech Republic, Tel: 00420 416 711 350 • www.hennlich-engineering.com, e-mail: engineering@hennli