Mixhead Portfolio 2021

Product catalog summary

Introduction
This document provides an overview of the mixhead and injector portfolio as of October 2021, detailing technical data and performance ranges for various discharge methods such as open mold, closed mold, spraying, and continuous.

Types of Discharge
The portfolio categorizes discharge types into open mold, closed mold, spraying, and continuous, each associated with specific mixheads and injectors for different applications.

Mixhead Portfolio
The mixhead portfolio includes models like STATICJET, FIXJET, FLEXJET, and TWINJET, each with specific performance data, dimensions, and designed for different numbers of components and discharge rates.

Performance Data
Performance data for each mixhead model includes the number of components, laminar output, and output when mounted on a mold, along with dimensions and approximate weights.

Selection Criteria
Criteria for selecting mixheads include the number of components, discharge rates, and specific applications such as slabstock or block foam.

Technical Specifications
Technical specifications detail each mixhead model's height, length, width, and weight, along with available injectors and their configurations.

Specifications
Models such as MXL 25-2, ML 25-4, MT 3-2, and others are described with parameters like capacity range, pressure range, dimensions, and weight, crucial for selecting the appropriate mixhead for industrial applications.

Procedures and Configurations
Dimensions and weights refer to the mixhead housing, with variations based on configurations involving hose lines, injectors, and sensors. Different injectors like non-adjustable, gas-loaded, and spring-loaded are suitable for various pressure systems.

Standards and Recommendations
Symbols indicate feature availability and suitability, with '5' for not available, '3' for suitable, and '⃝' for available or optionally available. Information is provided in good faith but subject to change.

Key Features
Features include manually adjustable injectors, interchangeable components for color applications, and designs for technologies like MULTI-CONNECT and QFM systems. Contact information for Hennecke GmbH is provided for further inquiries.

Catalog excerpts

MIXHEAD PORTFOLIO >> Mischkopf- und Düsenportfolio: Überblick, technische Daten und Leistungsspektrum (Stand: Oktober 2021) Mixhead and injector portfolio: Overview, technical data and performance range (as of October 2021)

Open the catalog to page 1

AUSWAHLKRITERIEN SELECTION CRITERIA LEISTUNGSDATEN PERFOMANCE DATA ABMESSUNGEN & GEWICHT DIMENSIONS & WEIGHT Laminare Austragsleistung bei Austrag in offene Form Austragsleistung bei Anbau an Form MISCHKÖPFE MIXHEADS Anzahl Komponenten Laminar output with discharge into open mold Output when mounted on mold VERFÜGBARE DÜSEN AVAILABLE INJECTORS ART DES AUSTRAGS TYPE OF DISCHARGE Offene Form Geschlossene Form Umlenkmischköpfe MT-A, nutengesteuert / MT-A deflection mixheads, groove-controlled Open mold Closed mold 5 FLEXJET GL 5 FLEXJET GL SINGLE 66 Servogesteuerte Düsen BlockschaumDüsenblenden-Set...

Open the catalog to page 2

Hennecke GmbH · Birlinghovener Str. 30 · 53757 Sankt Augustin (Germany) Email: [email protected] · See www.hennecke.com for worldwide locations Alle Angaben in diesem Prospekt nach bestem Wissen, jedoch ohne Verbindlichkeit. Konstruktionsänderungen vorbehalten. Die Abbildungen geben keine Auskunft über den Lieferumfang! The information in this brochure is given in good faith, however without engagement. Design subject to alterations. The illustrations and photos in this brochure do not reflect the scope of suppl

Open the catalog to page 3

All Hennecke PUR Solutions catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list