Absolute Encoder AC 58 - BiSS / SSI
13Pages

TECHNICAL DATASHEET Absolute Encoder AC 58 - BiSS / SSI TECHNICAL DATA TECHNICAL DATA Compact design: 50 mm length for single or multiturn Aids for start up and operation: diagnostic LED, preset key with optical response, status Use of sine/ cosine signals for fast control task possible Control input: Direction Interfaces: SSI, BiSS-B or BiSS-C indasm- . ilNTERFAÇE

TECHNICAL DATA electrical (continued) RECOMMENDED DATA TRANSFER RATE DATA FORMAT Singleturn TECHNICAL DATASHEET Absolute Encoder AC 58 - BiSS / SSI The max. data transfer rate depends on the cable length. For Clock/ Clock and Data / Data

TECHNICAL DATASHEET Absolute Encoder AC 58 - BiSS / SSI DATA FORMAT SSI Multiturn SO... S16 Data bits for resolution per revolution MO... M11 Data bits for number of revolution (only for multiturn) 1 Optionen (Parity bit. Alarm- and Parity bit, zero bit) on request 2W: from this data bit on the data iteration for multiplex starts 3 Paritybit: Even Parity (Das Paritybit erganzt die Datenbits auf eine gerade Anzahl von 4Alarm bit: is setto "1" when over temperature, undertemperture, disc breakage and Synchronous readout of the encoder data is according to the clock rate given by the The...

ELECTRICAL CONNECTIONS M23 connector (Conin), 12 pole/cable ELECTRICAL CONNECTIONS M23 connector (Conin), 12 pole/cable ELECTRICAL CONNECTIONS TECHNICAL DATASHEET Absolute Encoder AC 58 - BiSS / SSI 1 Direction: UB or unconnected = ascending code values with rotation cw 0 V = descending code values with rotation cw Connected with 0 V in the encoder. Use this output to lay Direction on "0V" if required. 3 use only thin wires (□ = 0.14 mm) 1 Direction : +UBor unconnected = ascending code values with rotation cw 0 V = descending code values with rotation cw 2 use only thin wires (□ = 0.14 mm)...

TECHNICAL DATASHEET Absolute Encoder AC 58 - BiSS / SSI ELECTRICAL CONNECTIONS M23 connector (Conin), 12 pole/cable Signal level high: > 70% Ub; low: < 20% Ub or unconnected Bounce time preset: >2s Bounce time direction: < 1 ms (dynamic) Preset-value: Zero Other values on request

DIMENSIONED DRAWINGS TECHNICAL DATASHEET Absolute Encoder AC 58 - BiSS / SSI <3> Interface: BiSS, SSI, ST-Parallel <4> Interface: MT-Parallel (only with cable), Fieldbus, SSI-P <7> Value in brackets alternative at SSI Cable bending radius R for flexible installation > 15 x cable diameter Cable bending radius R for fixed installation > 7.5 x cable diameter

DIMENSIONED DRAWINGS (continued) TECHNICAL DATASHEET Absolute Encoder AC 58 - BiSS / SSI <3> Interface: BiSS, SSI, ST-Parallel <4> Interface: MT-Parallel (only with cable), Fieldbus, SSI-P <8> Value in brackets alternative at SSI Cable bending radius R for flexible installation > 15 x cable diameter Cable bending radius R for fixed installation > 7.5 x cable diameter Cable 0 d Fieldbus: 7,1 +l2 Dimensions in mm

TECHNICAL DATASHEET Absolute Encoder AC 58 - BiSS / SSI DIMENSIONED DRAWINGS (continued) <3> Interface: BiSS, SSI, ST-Parallel <4> Interface: MT-Parallel (only with cable), Fieldbus, SSI-P <7> Value in brackets alternative at SSI Cable bending radius R for flexible installation > 15 x cable diameter Cable bending radius R for fixed installation > 7.5 x cable diameter Cable 0 d Fieldbus: 7,1 +l2 Dimensions in mm

TECHNICAL DATASHEET Absolute Encoder AC 58 - BiSS / SSI DIMENSIONED DRAWINGS (continued) <3> Interface: BiSS, SSI, ST-Parallel <4> Interface: MT-Parallel (only with cable), Fieldbus, SSI-P <8> Value in brackets alternative at SSI Cable bending radius R for flexible installation > 15 x cable diameter Cable bending radius R for fixed installation > 7.5 x cable diameter Cable 0 d Fieldbus: 7,1 +l2 Dimensions in mm

TECHNICAL DATASHEET Absolute Encoder AC 58 - BiSS / SSI ORDERING INFORMATION 1 Resolution 360 increments ST with Offset 76 (value range 76...435) 2 Resolution 720 increments ST with Offset 152 (value range 152...871) 4 Protection class IP67 not available in combination with preset key and LED display 5 Alarm- and/ or Parity-Bit on request. 6 Interface SSI Gray (+SinCos 1Vpp): not with connection "7" and "8" (M12) 7 Connection code "7" and "8" (M12) with square flange only for IP64 and 10x19,5 mm shaft 8 IP67 on cover with connector only if IP67 mating connector mounted properly. Preferably...

FLEXIBLE COUPLINGS TECHNICAL DATASHEET Absolute Encoder AC 58 - BiSS / SSI Connector (socket) matching with encoder connector Ordering code M23 (Conin), 12 pole, PG9, cw, mating connector for connection C/D/-I 3 539 202

CONNECTING CABLES TECHNICAL DATASHEET Absolute Encoder AC 58 - BiSS / SSI Coupling (socket) matching with encoder cable with connector Ordering code M23 (Conin), 12 pole, cw, mating connectorfor connection -C (cable 3 539 187 Connector (socket) matching with encoder cable with connector Ordering code M23 (Conin), 12 pole, ccw, mating connectorfor connection G/H/-D/-H 3 539 229

CONNECTING CABLES (continued) CONNECTING CABLES TECHNICAL DATASHEET Absolute Encoder AC 58 - BiSS / SSI