Vega 60

Vega 60

Vega 60

Product catalog summary
Key Features
  • Extremely accurate heading with long baselines.
  • Supports multi-frequency positioning and dual-frequency heading with GPS, GLONASS, BeiDou, Galileo, QZSS, NavIC (IRNSS), and L-band.
  • Atlas® L-band capable with 4 cm RMS accuracy.
  • Athena™ GNSS engine for superior RTK performance.
  • Excellent coasting performance and 5 cm RMS RTK-enabled heave accuracy.
  • Strong multipath rejection and Cygnus™ interference mitigation.
  • Equipped with a new multi-axis gyro and tilt sensor for reliable coverage during short GNSS outages.
Scalable Solutions

The Vega 60 offers scalable and field-upgradeable heading and positioning solutions with Hemisphere software and service options. It supports both single-frequency and multi-frequency modes for high accuracy L-band positioning from meter to sub-decimeter levels via the Atlas correction service.

Ease of Migration

The Vega 60 uses a 60-pin industry-standard form factor for easy upgrades from other manufacturers’ modules. It features dual antenna ports for fast, high-accuracy heading over short baselines, RTK positioning, and low power consumption.

Communications
  • Ports: 5 x full-duplex 3.3V CMOS, 2 x USB, 1 x Ethernet, 2 x CAN, 4 x PPS output, 4 x Event input.
  • Interface Level: 3.3V CMOS.
  • Baud Rates: 4800 - 460800.
  • Correction I/O Protocol: Hemisphere GNSS proprietary ROX format, RTCM v2.3, RTCM v3.2, CMR5, CMR+5.
  • Data I/O Protocol: NMEA 0183, Hemisphere binary.
Environmental Specifications
  • Operating Temperature: -40°C to +85°C.
  • Storage Temperature: -40°C to +85°C.
  • Humidity: 95% non-condensing.
  • Mechanical Shock: EP455 Section 5.14.1.
  • Vibration: EP455 Section 5.15.1 Random.
  • EMC: CE, FCC Part 15, CISPR 22.
Mechanical Specifications
  • Dimensions: 71 L x 46 W x 10 H (mm).
  • Weight: 24 g.
  • Status Indicators: Power, GNSS lock, Differential lock, DGNSS position, Heading.
Aiding Devices
  • Gyro: Provides smooth and fast heading reacquisition.
  • Tilt Sensors: Provide pitch, roll data and assist in fast start-up and reacquisition of heading solution.
GNSS Receiver Specifications
  • Receiver Type: Multi-Frequency GPS, GLONASS, BeiDou, Galileo, QZSS, NavIC (IRNSS) and Atlas L-band.
  • Signals Received: Various signals from GPS, GLONASS, BeiDou, Galileo, QZSS, NavIC, and Atlas.
  • Channels: 1,100+.
  • GPS Sensitivity: -142 dBm.
  • SBAS Tracking: 3-channel, parallel tracking.
  • Update Rate: 10 Hz standard, 1 Hz or 20 Hz optional.
Accuracy
  • Positioning: Autonomous 1.2 m, SBAS 0.3 m, Atlas H10 0.04 m, RTK 8 mm + 1 ppm.
  • Heading (RMS): 0.16° RMS @ 0.5 m antenna separation.
  • Pitch/Roll (RMS): 0.5°.
  • Heave (RMS): 30 cm RMS (DGNSS), 5 cm RMS (RTK).
L-Band Receiver Specifications
  • Receiver Type: Dual Channel.
  • Channels: 1525 to 1560 MHz.
  • Satellite Selection: Manual and Automatic.
  • Reacquisition Time: 15 seconds (typical).
Power Specifications
  • Input Voltage: 3.3 VDC +/- 5%.
  • Power Consumption: < 2.5 W all signals + L-band.
  • Current Consumption: 757 mA all signals + L-band.
  • Antenna Voltage: 5 VDC maximum.
  • Antenna Short Circuit Protection: Yes.
See more

Catalog excerpts

Vega 60-1

GNSS Compass Board tablets' The Vega 60 is our most advanced GNSS heading and positioning board. Vega 60 uses dual antenna ports to create a series of additional capabilities; including fast, high-accuracy heading over short baselines, RTK positioning, onboard Atlas L-band, RTK-enabled heave, low power consumption, and precise timing. With Vega 60, heading and positioning are scalable and field upgradeable with all Hemisphere software and service options. Utilize the same multi-constellation GNSS solutions in either single-frequency mode or employ the full performance and fast RTK initialization times over long distances with multi-frequency signals. High accuracy L-band positioning from meter to subdecimeter levels is available via the Atlas correction service. Leverage the 60-pin industry standard form factor for easy upgradeability from other manufacturers’ modules. • Extremely accurate heading with long baselines • Available multi-frequency position, dual-frequency heading supporting GPS, GLONASS, BeiDou, Galileo, QZSS, NavIC (IRNSS), and L-band • Atlas® L band capable to 4 cm RMS • Athena™ GNSS engine providing best-in-class RTK performance • Excellent coasting performance • 5 cm RMS RTK-enabled heave accuracy • Strong multipath rejection and Cygnus™ interference mitigation • New multi-axis gyro and tilt sensor for reliable coverage during short GNSS outages

 Open the catalog to page 1
Vega 60-2

Receiver Type: Multi-Frequency GPS, GLONASS, BeiDou, Galileo, QZSS, NavIC (IRNSS) and Atlas L-band Communications Ports: Channels: GPS Sensitivity: SBAS Tracking: Update Rate: Cold Start: Warm Start: Heading Fix: Antenna Input Impedance: Maximum Speed: Maximum Altitude: QZSS L1CA/L2C/L5/L1C/L6 NavIC (IRNSS) L5 Atlas 1,100+ 3-channel, parallel tracking 10 Hz standard, 1 Hz or 20 Hz optional (with activation) 100°/s maximum 60 s typical (no almanac or RTC) 30 s typical (almanac and RTC) 10 s typical (almanac, RTC and position) Interface Level: Baud Rates: Data I/O Protocol: Timing & Event I/O:...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.