HA32 UAV GNSS Antenna

Product catalog summary

Overview: The HA32 UAV GNSS Antenna is a high-performance, multi-GNSS, multi-frequency antenna designed for UAV, GIS, and RTK applications. It supports GPS, BeiDou, GLONASS, Galileo, QZSS, SBAS, and Atlas L-band signals.

Specifications:

Signals Received: GPS L1/L2, BeiDou B1/B2, GLONASS G1/G2, Galileo E1/E5b, QZSS L1/L2, SBAS, Atlas L-band
GNSS Frequency: 1200 - 1250 MHz, 1539 - 1609 MHz
Polarization: Right hand circular
Axial Ratio: 1 dBn max @ Axis
Passive Peak Gain: 3 dBn, typical
LNA Gain: 30 dBn, typical
LNA Noise: 2.0 dBn, typical
Out-of-Band Rejection: >50 dBc @ f0±200 MHz

Power:

Input Voltage: 3.3 to 6 VDC
Input Current: 25 mA, typical

Phase Center Variation: Less than 5 mm at GPS L1/L2 for elevations above 30 degrees

Mechanical:

Dimensions: 7.5 H x 4.1 D (cm)
Weight: 0.04 kg (0.09 lbs)
Mount: 0.45 mm thread pitch, 6 mm maximum thread length
RF Connector: SMA plug connector

Environmental:

Storage Temperature: -40° C to +85° C (-40°F to +185°F)
Operating Temperature: -40° C to +70° C (-40°F to +158°F)
Enclosure Rating: IP67
Shock: RTCA-DO-160G Section 7, Helicopter-Type
Vibration: RTCA-DO-160G Section 8, Helicopter-Type

Design and Features: The HA32 is built on proprietary 4-helix technology for superior filtering and anti-jamming performance. It includes an O-ring and three mounting screws for easy installation.

Contact Information: Hemisphere GNSS, 8515 E. Anderson Drive, Scottsdale, AZ 85255, USA. Phone: +1 (480) 348-6380, Toll-Free: +1 (855) 203-1770, Fax: +1 (480) 270-5070, Email: [email protected], Website: www.hgnss.com

Catalog excerpts

MULTI-FREQUENCY MULTI-GNSS UAV ANTENNA ? atlas' GNSS Sensor Signals Received: GPS L1/L2, BeiDou B1/B2, GLONASS G1/ G2, Galileo E1/E5b, QZSS L1/L2, SBAS, Atlas 1200 - 1250 MHz, 1539 - 1609 MHz Right hand circular 1 dBn max @ Axis 3 dBn, typical 30 dBn, typical 2.0 dBn, typical GNSS Frequency: Polarization: Axial Ratio: Passive Peak Gain: Input Current: 25 mA, typical Phase Center Variation Less than 5 mm at GPS L1/L2 for elevations above 30 degrees The multi-GNSS, multi-frequency HA32 is a high-performance UAV GNSS antenna designed to receive GPS, BeiDou, GLONASS, Galileo, QZSS, SBAS, and Atlas L-band signals. The antenna, with its small form-factor, is designed specifically for UAV, GIS, and RTK applications. The HA32 is built on a proprietary 4-helix technology that provides superior filtering and anti-jamming performance. The antenna is equipped with an O-ring and three mounting screws for easy installation and offers an IP67 enclosure rating. .45 mm thread pitch 6 mm maximum thread length SMA plug connector Shock: RTCA-DO-160G Section 7, Helicopter-Type Vibration: RTCA-DO-160G Section 8, Helicopter-Type Hemisphere GNSS 8515 E. Anderson Drive Scottsdale, AZ 85255, USA / [email protected] www.hgnss.com Copyright © Hemisphere GNSS, Inc. All rights reserved. Specifications subject to change without notice. Aquila, aRTK, Atlas, AtlasLink, BaseLink, Crescent logo, Cygnus, Earthworks logo, Eclipse, GradeMetrix, Hemisphere, LandMetrix, Lyra, Outback Guidance, SiteMetrix, SureFix, Vector, and Vega are trademarks of Hemisphere GNSS, Inc.

Open the catalog to page 1

HA32 UAV GNSS Antenna

HA32 UAV GNSS Antenna

Catalog excerpts

All Hemisphere GNSS catalogs and technical brochures