GNSS Compass Board tablets' The Vega 34 is our most advanced GNSS heading and positioning board. Vega 34 uses dual antenna ports to create a series of additional capabilities; including fast, high-accuracy heading over short baselines, RTK positioning, onboard Atlas L-band, RTK-enabled heave, low power consumption, and precise timing. With Vega 34, heading and positioning are scalable and field upgradeable with all Hemisphere software and service options. Utilize the same multi-constellation GNSS solutions in either single-frequency mode or employ the full performance and fast RTK initialization times over long distances with multi-frequency signals. High accuracy L-band positioning from meter to subdecimeter levels is available via the Atlas correction service. Leverage the 34-pin connector for easy upgradeability from previous 34-pin Hemisphere modules. • Extremely accurate heading with long baselines • Available multi-frequency position, dual-frequency heading supporting GPS, GLONASS, BeiDou, Galileo, QZSS, NavIC (IRNSS), and L-band • Atlas® L band capable to 4 cm RMS • Athena™ GNSS engine providing best-in-class RTK performance • Excellent coasting performance • 5 cm RMS RTK-enabled heave accuracy • Strong multipath rejection and Cygnus™ interference mitigation • New multi-axis gyro and tilt sensor for reliable coverage during short GNSS outages

GNSS Receiver Specifications Communications Receiver Type: Multi-Frequency GPS, GLONASS, Ports: 4 x full-duplex 3.3V CMOS 2 x USB (1 Host/1 Device) BeiDou, Galileo, QZSS, NavIC (IRNSS) 2 x CAN (NMEA2000, ISO 11783) and Atlas L-band 1 x PPS output, 1 x Event input Signals Received: GPS L1CA/L1P/L1C/L2P/L2C/L5 Interface Level: 3.3V CMOS GLONASS G1/G2/G3, P1/P2 Baud Rates: 4800 - 460800 BeiDou B1i/B2i/B3i/B1C/B2a/B2b/ Correction I/O Protocol: Hemisphere GNSS proprietary ROX AceBOC format, RTCM v2.3, RTCM v3.2, GALILEO E1BC/E5a/E5b/E6BC/ CMR5, CMR+5 AltBOC Data I/O Protocol: NMEA 0183, Hemisphere...