VSE Balance Enclosure Versatile vented balance enclosure is ideal for critical weighing procedures involving hazardous powders and liquids. The VSE comes in 24”, 36” and 48” widths to accommodate all analytical balances. Efcient air ow design with air foils and by pass directs airborne particulate to bafed exhaust thereby providing superior air ow and containment performance for user protection. The ergonomic design provides added user comfort. Constructed of chemical resistant metal framing with 1/4” thick clear tempered safety glass side panels and viewing sash. The viewing sash is angled 15 degrees for ease of viewing comfort with 8” reach in opening height. sash swings up to provide 20” of access opening. 2 service ports are located in lower right and left rear wall. Clean-Aire Filtration Module II Cat. No. 50120 Convenient solution to point of use exhaust and ltration. Module effectively collects particulates and or fumes. Can locate on bench top, oor, or shelf and connects to enclosure with ex ducting. Unit operates on 115V and is equipped with variable speed control from 0-600 CFM and an 8” power cord. Note: Filters are not included with the module. Please select lters required below. We recommend ordering replacement backup lters. VSE - Cat. No. 84800 shown above with optional Polypro Mobile cabinet, Phenolic Worksurface and Clean- Aire Filtration Module II. Phenolic Work surface Flex Ducting 6” Dia. X 12’ long Exhaust Fan for remote mount 115 volts, 60Hz Polypro Mobile Cabinet 24” depth X 36” Height VSE Balance Enclosure 24” Depth X 22” height Prelter 15” x 15” HEPA Filter 99.99%, 15” X 15” Activated Carbon Filter 15” X 15” Visit www.HEMCOcorp.com HEMCO Corporation 711 S. Powell Road Independence, MO 64056 VSE - Cat. No. 83600 shown above with optional Table & Phenolic Worksurface.