SE Dual Entry Fume Hood
2Pages

SE Dual Entry Fume Hoods UniFlow SE Dual Entry Air By-Pass hoods are ideal for demonstrations or applications where observation and access is required from both sides of the fume hood. Dual Entry hoods are available in 48”, 60”, 72”, & 96” widths and in 30”, 36” & 48” depths. They can be positioned on an island on in peninsular locations. Dual Entry hoods can be located on a common wall of two rooms with accessibility from either room. UniFlow Superstructure exclusive unitized dual wall construction for superior chemical resistance, strength, and durability. Meets U.L.1805, and NFPA-45 classication with ame spread of less than 25 per ASTM E-84. Access Panel removable to access ducting connections and electrical services from a single point electrical box,115V/60Hz AC operation. Full 30” Viewing Height Sash with 28.5” sash opening height for ease of access and viewing tall apparatus setup. Sash is 3/16 thick tempered safety glass, with chemical resistant non-metallic PVC framing track and aerodynamic sash lift. Sash handle for efcient air ow and ease of movement. Standard horizontal sash, optional vertical sash, specify sash for each side. Air Flow Monitor continuously monitors face velocity airow, analog or digital available. Meets ANSI and OSHA requirements. Optional equipment. Angled Picture Frame Opening the aerodynamic face opening with air foil provides uniform air ow into the fume chamber and thru the VaraFlow bafe system to the bell shaped exhaust collar. Plumbing Fixtures are color coded to specic service. Epoxy Work Surfaces epoxy resin UniFlow SE Dual Entry Fume Hood Cat. No. 12160, shown with optional accessories. Fume Hood Base Cabinet optional feature SASH OPTIONS HORIZONTAL MOVING SASHES The standard sash for HEMCO dual entry fume hoods. The maximum sash opening for the horizontal sash is 1/2 that of the vertical sashes. The smaller opening, means less air exhausted resulting in energy savings. HEMCO Corporation 711 S. Powell Road Independence, MO 64056 AIR FLOW MONITORS WITH REPEATER OPTIONAL VERTICAL MOVING SASHES The optional sash for HEMCO dual entry fume hoods. The sash may be lifted to the completely open position for maximum access tho the fume chamber. Sash stops available. The AFA 1000/1/Mk2 model is a ush mounted airow monitor for Fume Hoods. It features a back lit display which displays the airow velocity or Air Flow status. When the alarm is activated, the display will alternate between the airow velocity and the alarm condition. • Password protected push button set-up and calibration menus with on screen instructions • Unit is mounted on the face of the fume hood side wall at a convenient viewing height. Cat No. 51405

SE Dual Entry Fume Hoods UNIFLOW SE DUAL ENTRY DESCRIPTIONS Hood Depth 1. Dual Entry Bypass CAV Hood 30” Depth: Superstructure to be modular FUME HOOD WIDTH A 2. Vertical Moving Sash Option: Add sufx to catalog number. 3. Epoxy Resin Work Surface: Ideal for high composite chemical resistant FRP non-metal construction. Interior fume chamber to be glass-smooth with bell shaped exhaust collar. Picture frame sash opening in front with (4) horizontal moving sashes constructed of clear tempered safety glass with chemical resistant PVC framing, track. Vapor-proof light xture and switch pre-wired...