Catalogs >
HELUKABEL >
SiHF

SiHF
2Pages

Catalog excerpts

SiHF increased temperature resistance, tinned wire TECHNICAL DATA Silicone control and connection cable in alignment with DIN VDE 0250-1, DIN VDE 0285-525-2-83 / DIN EN 50525-2-83 Temperature range flexible -25°C to +180°C fixed -60°C to +180°C Permissible operating temperature of the conductor +180°C Nominal voltage AC U0/U 300/500 V Test voltage core/core 2000 V Breakdown voltage 4000 V Minimum bending radius flexible 7.5x Outer-Ø fixed 4x Outer-Ø TESTS n • halogen-free acc. to DIN VDE 0482-754-1 / DIN EN 60754-1 / IEC 60754-1 • corrosiveness of combustion gases acc. to DIN VDE 0482-754-2 / DIN EN 60754-2 / IEC 60754-2 • flame-retardant acc. to DIN VDE 0482-332-1-2 / DIN EN 603321-2 / IEC 60332-1-2 • certifications and approvals: EAC 19.07.2023 / We reserve the right to make technical changes; the imprint in the image is purely exemplary • Copper wire tinned, finely stranded acc. to DIN VDE 0295 Class 5 / IEC 60228 Class 5 • Core insulation: silicone • Core identification acc. to DIN VDE 0293-308, 2 - 5 core(s): colour coded 6 - 25 core(s): black cores with consecutive labeling in white digits • Protective conductor: starting with 3 cores, G = with protective conductor GN-YE, in the outer layer, x = without protective conductor • Cores stranded in layers with optimal lay lengths • Outer sheath: silicone • Sheath colour: redbrown • Length marking: in metres PROPERTIES n • resistant to: ozone, oxygen, weathering effects, alcohols, dilute acids, alkalis, saline solutions, oxidising agents, high molecular weight oils, vegetable and animal fats, plasticisers and clophen, seawater Cu-weight kg/km halogen-free high flash point leaves an insulating layer of SiO2 when exposed to flames no significant changes in dielectric strength and insulation resistance even at higher temperatures Weight kg/km, approx. APPLICATION n Silicone cables were evolved for use wherever insulation is subjected to extreme temperature changes. The good performance of the environmental resistant properties means that silicone cables can be used at temperatures down to -60°C. Silicone cables are halogen-free cables and are especially suited for installation in power stations. They have also found their uses in the steel producing industries, aviation industry, ship building as well as in ceramic, glass and cement factories. Due to elastical characteristic of core insulations, these are used as flexible connection cable NOTES n • the conductor is metrically (mm²) constructed, AWG numbers are approximated, and are for reference only • for fixed installation, always install in open, ventilated pipe or duct systems; otherwise, a combination of high temperatures above 90°C and the absence of air would affect the mechanical properties of silicone Cu-weight kg/km Weight kg/km, approx.

Open the catalog to page 1