*mydirectindustry

Catalogs
HELMUT FISCHER GMBH - INSTITUT FÜR ELEKTRONIK UND
Measuring stands and sample holders-V12 Base

Measuring stands and sample holders-V12 Base

Product catalog summary

Description: The Measurement Stand V12 BASE is designed for precise and reproducible measurements on small parts such as fasteners, stampings, and sleeves, or parts with complex geometry. It includes various probe mounting adapters compatible with Fischer standard probes.

Performance: The stand features a mechanical probe lowering device operated by a lever, which gently places the probe on the specimen's surface. The stand head can swivel up to +/- 60° with snap-in positions at 0°, 30°, and 60°.

Ordering Information: The product code for ordering is 604-420, which includes the support stand V12 BASE with a manual probe lowering device.

Scope of Supply: The package includes the measurement stand, three clamping devices for Fischer standard axial probes (18, 13, and 10 mm), an even table for small parts, a V-table for small parts, a stop device, and an Allen wrench for fixing/mounting the probe clamping device and tables.

Weight and Dimensions: The stand weighs 4.7 kg (10.36 lb). Dimensions are provided in millimeters (inches): 345 (13.6) x 160 (6.3) x 226 (8.9) with a maximum capacity of 120 (4.7) depending on probe type, and 35 (1.4) x 132.5 (5.2).

Catalog excerpts

Measuring stands and sample holders-V12 Base-1

DATA SHEET Measurement Stand V12 BASE For precise and reproducible Measurements. Q Coating Thickness [jj] Material Analysis Microhardness jjj] Material Testing

Open the catalog to page 1

Measuring stands and sample holders-V12 Base-2

Measurement Stand V12 BASE Description For precise and reproducible measurements on small parts, such as fasteners, stampings, sleeves etc. or parts with complex geometry a measurement stand is necessary, into which a probe can be clamped. Various probe mounting adapters suited for the Fischer standard probes are contained in the scope of stand supply. Performance Mechanical probe lowering device. A lever is used to lower the clamped probe to the surface of the specimen. A specific lever mechanism of the stand slows down the lowering speed shortly before the probe attaches the surface of the...

Open the catalog to page 2

All HELMUT FISCHER GMBH - INSTITUT FÜR ELEKTRONIK UND catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list