FISCHERSCOPE MMS PC2
16Pages

FISCHERSCOPE® MMS® PC2 The Universal Multi-Measuring System for Coating Thickness Measurement and Material Testing  Coating Thickness  Material Analysis  Material Testing

FISCHERSCOPE® MMS® PC2 – The versatile benchtop instrument The FISCHERSCOPE MMS® PC2® is used wherever quality is a top priority: in incoming inspection, in final inspection, during ongoing production, for sampling or routine tests. And that in all industries. As a result of its modern design, the MMS PC2 can be adapted specifically to your needs and expanded at any time. Whether coating thickness, electrical conductivity or ferrite content, with the MMS PC2 you will always measure precisely and correctly. MMS PC2 – one measuring instrument for all measuring applications. Coating...

A wide variety of applications Measurement of thin organic coatings, e.g. oils, with the hand probe Z15NG-TC Hand probe with beta emitter for measurements according to the radiometric beta-backscatter method, an integrated temperature sensor serves to automatically compensate for the beta radiation damping through the air at different temperatures. Measurement of the chrome coating on pistons with the measurement probe V2EGA06H in the motorised support stand Incoming inspection Measuring station with several module boards and probes for incoming inspection, mounted on a transport trolley...

Typical configurations Measuring station lacquer laboratory Measuring station for determining the coating thickness of: • Lacquer coatings on nonferrous metals • Lacquer coatings on iron or steel • Duplex measurements, i.e. lacquer on zinc on iron or steel with simultaneous measurement of both coatings Anodising measuring station Measuring station with several probes for testing various parts with different geometries without having to reinsert the probes. The correct probe is automatically activated when the application is selected. Measurement of the coating thickness and conductivity of...

Data evaluation The FISCHERSCOPE MMS PC2 offers a wide variety of possibilities for evaluating your measuring results. Simple visualisation of the process quality with the factory diagnosis diagram (FDD®) Evaluation and statistics functions • Display of important statistical characteristics such as mean value, standard deviation, min, max, and range • Statistics display of the important characteristics in the block and final result • Graphic display as a histogram, sum frequency chart, FDD • Possibility of entering the process tolerance limits and calculation of the corresponding process...

Adaptable due to modular structure MODULE SLOTS 100 different applications - eight slots and more than 60 probes Due to its modular design, the MMS PC2 is always right for your applications. Based on your measuring application, we assemble the measuring instrument for you with the right module boards and probes Eight different module boards The measurement of the physical quantities of coating thickness, electrical conductivity and ferrite content requires different test methods. In the case of coating thickness measurement, different test methods are used, depending on the...

Technical data Hardware concept Housing with 8 slots for module boards with different test methods. Test method •• Magnetic method (DIN EN ISO 2178) •• Magnetic induction method (DIN EN ISO 2178, ASTM D7091) •• Amplitude sensitive eddy current test method (DIN EN ISO 2360, ASTM D7091) •• Phase sensitive eddy current test method (DIN EN ISO 21968) •• Micro-resistance method (DIN EN 14571) •• Beta-backscatter method (DIN EN ISO 3543, ASTM B567a) Measured quantities Coating thickness, electrical conductivity, ferrite content, temperature Measurement probes Connection sockets on the module...

Module boards/areas of application Depending on the application, you can assemble your FISCHERSCOPE® MMS® PC2 with the following modules. Module boards TEMPERATURE Measuring method SIGMASCOPE® / PHASCOPE® 1 SIGMASCOPE® / PHASCOPE® 2 PHASCOPE® DUPLEX Coating thickness measurement - electromagnetic measuring methods Eddy current measuring method DIN EN ISO 2360 Electrically nonconductive coatings on nonferrous metals Electrically nonconductive coatings on ferromagnetic substrate materials (steel or iron) Magnetic induction measuring method DIN EN ISO 2178 Magnetic induction measuring method...

Measuring method SIGMASCOPE® / PHASCOPE® 1 SIGMASCOPE® / PHASCOPE® 2 PHASCOPE® / DUPLEX Module boards Conductivity measurement Electrical conductivity of nonferrous metals Phase sensitive Eddy current method DIN EN ISO 21968 Ferrite content measurement Ferrite content in austenitic and duplex steels Magnetic induction method DIN EN ISO 2178 Temperature measurement Temperature measurement with the temperature probe TF100A (temperature probe with Pt100 sensor) Temperature recording With a Pt100 sensor, measurement range -20 ºC to +80 ºC Coating thickness measurement - beta-backscatter method...

Measuring methods Phase sensitive eddy current measuring method Standard: DIN EN ISO 21968 Micro-resistance measuring method Standard: DIN EN 14571 Eddy currents Current source Lamination and intermediate layers Electr. separated copper coatings Functional principle The high-frequency magnetic field generated in the probe induces eddy currents in the copper sleeve whose magnetic field weakens the primary magnetic field. The thicker the copper sleeve, the stronger the weakening is. A specially patented probe design results in an expansion of the eddy currents that is essentially in the...

Beta-backscatter measuring method Standard: DIN EN ISO 3543, ASTM B567a Measurement signal for MMS® PC2 Beta transmission method Standard: DIN EN ISO 3543, ASTM B567a Radiation detector (Geiger-Müller tubes) Radiation detector (Geiger-Müller tubes) Thin material (absorber) Backscattered beta particles (secondary radiation) Beta emitter (primary radiation) Beta particles Measuring stage housing Isotope holder Coating thickness d Juwelring® cover Substrate material Functional principle An isotope source emits beta radiation (electrons). These penetrate the surface of the coated workpiece and...