Overview: The TB20-C is a PROFINET IO bus coupler designed to connect a PROFINET bus to TB20 peripheral modules. It supports hot-swapping, allowing modules to be replaced during operation, and can accommodate up to 63 modules.
Specifications:- Power Supply: 24 V DC with an integrated power supply unit providing 2.5 A for peripheral modules.
- PROFINET Interface: Two ports with a full-duplex transmission rate of 100 Mbps, supporting Conformance Class C and Media Redundancy Protocol (MRP).
- USB Interface: One full-speed USB 1.1 device port for diagnostics and configuration.
- Dimensions: 110 x 35 x 73 mm, weight approximately 115 g.
- Environmental Conditions: Operating temperature 0 °C to +60 °C, storage temperature -20 °C to +80 °C, relative humidity 95% without condensation.
- Certifications: CE, UL, RoHS, REACH compliant.
Features:- Integrated 2-port switch and automatic addressing with topology detection.
- Diagnostic, process, and pull/plug alarms with a minimum cycle time of 250 µsec.
- Supports I&M data and integration using GSDML files.
- Equipped with 7 LEDs for status indication, including one bi-color LED.
Installation and Usage: The bus coupler requires a 24 V DC power supply and can be installed in any position. It includes a concealed factory reset switch for restoring factory settings and supports online diagnostics and configuration via the TB20 ToolBox.
Compliance and Standards: The device complies with EMC immunity and emission standards (DIN EN 61000-6-2 and DIN EN 61000-6-4) and vibration and shock resistance standards (DIN EN 60068-2-8 and DIN EN 60068-27).
See more