Catalogs >
Helmholz GmbH & Co. KG >
FLEXtra® multiRepeater 4-fach

FLEXtra® multiRepeater 4-fach
6Pages

Catalog excerpts

Systeme Helmholz FLEXtra multiRepeater 6-way Sysfeme Helmholz FLEXtra multiRepeater 4-woy Version www.helmholz.com

Brief Instruction FLEXtra® multiRepeater Application and functional description The FLEXtra® multiRepeater is primarily a normal PROFIBUS Repeater with the expansion by 3 (for the 4-way) or 5 (for the 6-way) additional segments. This enables, e.g. the simple establishment of a PROFIBUS-star network. It regenerates the signals in flank slope, level and duty cycle. Mounting The FLEXtra® multiRepeater is suitable for mounting on a DIN rail. It is engaged as shown on the picture. Switching repeat function A DIP switch is installed for the deactivation of the repeat function on the individual...

Open the catalog to page 2

Brief Instruction FLEXtra® multiRepeater Target audience This description is only intended for trained personnel qualified in control and automation engineering who are familiar with the applicable national standards. For installation, commissioning, and operation of the components, compliance with the instructions and explanations in this operating manual is essential. The specialist personnel is to ensure that the application or the use of the products described fulfills all safety requirements, including all applicable laws, regulations, provisions, and standards. Intended use The device...

Open the catalog to page 3

Brief Instruction FLEXtra® multiRepeater Application examples Example 1: Extension of a bus. FLEXtra® multiRepeater 4-way PLC Example 2: Complex tree bus structure. FLEXtra® multiRepeater 4-way Drive PROFIBUS Slave PROFIBUS Slave PROFIBUS Slave Operator Panel

Open the catalog to page 4

Brief Instruction FLEXtra® multiRepeater Application examples Example 3: Complex star structure. FLEXtra® multiRepeater 6-way SUB-Net 1 PLC PROFIBUS Slave PROFIBUS Slave Operator Panel Example 4: Extension by one line. The Compact Repeater can be used for this. FLEXtra® multiRepeater 4-way SUB-Net 4 Operator Panel PROFIBUS Slave SUB-Net 5 PROFIBUS Slave

Open the catalog to page 5

Brief Instruction FLEXtra® multiRepeater Technical Data FLEXtra* multiRepeater Dimensions in mm (D x W x H) Weight Power supply • Voltage • Electrical isolation • Current consumption • incl. 5V-consumer load • incl. 24V-consumer load i-way 72 x 94 x 35 approx. 180 g +18 ... 30 V DC 500 V, between segments typ. 280 mA at DC 24 V, without load max. 320 mA max. 1120 mA Technical Data FLEXtra® multiRepeater 6-way Dimensions in mm (D x W x H) 72 x 137 x 35 Power supply • Voltage • Electrical isolation • Current consumption • incl. 5V-consumer load • incl. 24V-consumer load +18 ... 30 V DC 500 V,...

Open the catalog to page 6