Ethernet Switch, 16-port, unmanaged, 10/100 Mbps (700-840-16S01) Version: 1 / 06/11 /2018 for HW 1 Application area The Helmholz Ethernet Switch 16-port unmanaged is suitable for installation on a DIN rail and connects up to 16 Ethernet participants with 10 or 100 Mbps. Connections The Ethernet Switch 16-port has 16 RJ45 connections. The Ethernet Switch 16-port must be supplied with 24 V DC at the 18 - 30 wide range input via the provided connector plug. The terminal (FG) is for the functional ground. Connect this correctly with the reference potential. Features - Store-and-Forward architecture - 10/100Base-T/TX, Full-/Half-Duplex (Autonegotiation) - HP Auto MDI/MDI-X & IEEE 802.3u Auto crossover support - CoS according to IEEE 802.1Q - Qos-Priority-Queues: 8 - LLDP & PTCP Delay-Traffic blocking (for PROFINET networks) - 2x 16K MAC address lookup table - 2x 256 KByte memory for frame buffering - IEEE 802.3x Full duplex flow control - Up to 51 Gbps high-performance memory bandwidth - support frame sizes up to 10KByte LEDs PWR Led On = Power supply present Off = No voltage or the device is defective RJ45 LEDs Orange (Link/Activity): On = Connected Blinks = Data transmission Green (Speed): On = 100 Mbps Off = 10 Mbps Helmholz GmbH & Co. KG | Hannberger Weg 2 | 91091 Groftenseebach Phone +49 9135 7380-0 | Fax +49 9135 7380-490 | [email protected] | www.helmholz.de

Helmholz COMPATIBLE WITH YOU Note: The contents of this document have been checked by us for matching with the hardware and software described. However, we assume no liability for any existing differences, as these cannot be fully ruled out. The information in this document is, however, updated on a regular basis. When using your purchased products, please make sure to use the latest version of the document, which can be viewed and downloaded in the Internet at www.helmholz.de. Helmholz GmbH & Co. KG | Hannberger Weg 2 | 91091 Groftenseebach Phone +49 9135 7380-0 | Fax +49 9135 7380-490 | [email protected]...