Solutions for Solar Market
8Pages

Solar Energy Comprehensive cable management solutions for solar plants

UV Weathering Test UV-stability tested by Fraunhofer ISE HellermannTyton commissioned the Fraunhofer Institute for Solar Energy Systems ISE to carry out an extended UV weathering test on cable ties. Four HellermannTyton cable ties made from different plastics were fastened under load to cylinders and exposed to UV radiation at controlled intervals inside a test chamber. Loop strength tests were subsequently performed by VDE Institute on the ties according to section 9.5.1 of DIN EN 62275:2010-07. The specimens were exposed to a UV dose of 156.78kWh/m² for 1600 hours, corresponding to...

• UV resistant black cable tie available in a wide range of sizes • Made from 100 % high quality plastic, allows for good recycling • Inside serration for a strong hold onto bundles • Easy application either manually or with a processing tool • Simply to insert due to bent tail All dimensions in mm. Subject to technical changes. Minimum Order Quantity (MOQ) may differ from package content. Other packaging options may also be available. • Manufactured from polyamide 11 • High UV resistance for long-term outdoor applications • Stable technical performance even at very low temperatures • High...

Cable Ties and Fixings Cable Ties With Fixing Elements Cable Ties, Stainless Steel Cable Ties with Ball-Lock MBT-Series, Stainless Steel 304 • Cable ties MBT, made from stainless steel 304 • Patented non-releasable locking feature • Corrosion resistant • Weather resistant • Outstanding chemical resistance • High temperature resistant • Non-burning Pack Cont. All dimensions in mm. Subject to technical changes. Minimum Order Quantity (MOQ) may differ from package content. Other packaging options may also be available. Cable Ties With Fixing Elements 2-Piece Fixing Ties for Edges, 1.0 - 3.0...

Cable Ties and FixingsCable Ties With Fixing Elements Pre-assembled 2-piece fixing tie with EdgeClip Cable tie head can be moved after bundling For minimum bundle diameters of 1 mm For edges of 3 - 6 mm Fixing Elements Fixing Elements for cables with Automatic Locking Feature GalvaLok Edge-Clips Push and click closure for fixing 1 or 2 cables. Bundle diameter is from 6.4 to 7.1mm. Ideal for use where holes are not acceptable. Made of PA11, same as GalvaLok cable ties, GalvaLok Edge-Clip has excellent salt corrosion resistance and insulation resistance. All dimensions in mm. Subject to...

• Pre-assembled 2-piece fixing tie with EdgeClip and Q-tie • A perfect complement within our Q-Series range • Unique and innovative cable tie with open-head design • Time saving solution due to quick and simple installation • Q-tie saves more than 25 % of usual working time • Cable tie head can be moved after bundling • For edges of 1 - 3 mm Fixing Elements Fixing Elements for Tubes and Harnesses, for Edges EdgeClip-Family Integrated design allows for easy insertion by hand The panel thickness range allows for multiple applications Double-compression design that accommodates various sizes...

Fixing Elements Fixing Elements for Tubes and Harnesses Harness Clip with arrowhead Click wires into clip to be held securely in place 360° rotatable clip, this allows movement of wires if needed Just push the arrowhead into place for very quick and simple fixing All dimensions in mm. Subject to technical changes. For detailed information on thermal transfer printers please refer to our main catalogue. TAGPU is a special UV-stabilised Tiptag Thermal transfer or laser beam printable Halogen Free Meets MIL-STD 202G Method 215K mark permanence tests Good mechanical strength and highly flexible...