Heat Shrinkable Tubing Product Selection Chloroprene tubing and grommets Size Overview The right Heat Shrink Tube Helsyn TH - thin wall Heatshrinkable Tubing Overview Installation aid for tubing and grommets Thin wall TCN20 overexpanded, 3:1, self extinguishing HFT-A, 2:1, flexible and coloured, self extinguishing TR27, 2:1, halogen free and highly flame retardant TK20, 2:1, PVDF semi-rigid in 1.2 m lenghts Thin wall with adhesive liner EPS-300, 3:1, on reel Standard wall with adhesive liner SA47, 4:1, 1.2 m lengths Viton®-E, 2:1, high performance Fluoroelastomer

Insulation Product Selection Overview of applications for Heat Shrink Tubing When selecting the correct heat shrink tubing size, it is important to bear in mind the 80:20 rule. The heat shrink tubing must shrink by at least 20% and not more than 80% of its complete shrinkage capacity to achieve the right result. In our overview of applications you will find the best heat shrink tube for every cable diameter. The 80:20 rule has of course been taken into account in the table. Heat Shrinkable Tubing with a shrink ratio of 2:1 ® HFT-A, TL27, TF21, TF24, VITON -E, TK20, TK29, TFE-2, TR27, TCN20, SE28...

Insulation Product Selection The right Heat Shrink Tube The 80:20 rule means that a heat shrink tube should shrink by a maximum of 80% and a minimum of 20%. For example: A cable with a diameter of 5mm is to be wrapped in heat shrink tubing. In theory both sizes 6/2 and 12/4 would be suitable, since the required diameter of 5mm lies within the shrink range of both tube sizes. Size 6/2 Size 6/2 has a range of application of between 2.8 mm and 5.2 mm and is therefore suitable for the cable diameter of 5 mm. The smallest application diameter of size 12/4 is 5.6 mm. This size is therefore unsuitable...

Insulation Product Selection Heat Shrinkable Tubing Overview Shrink Ratio Operating Temperature Packaging Type Black, Blue, Orange, Red, White, Yellow Black, Blue, Green, Red, White, Yellow Black, Transparent Black, Transparent Black, Transparent Thin-Wall Hot melt adhesive StandardWall Hot melt adhesive Further information at www.HellermannTyton.com/insulation

Insulation Heat Shrinkable Tubing Heat shrinkable tubing 2:1 - Self extinguishing TCN20 TCN20 is suitable for a wide range of applications like electrical insulations, mechanical protection and cable bundling. Features and benefits • Thin wall general purpose polyolefin tubing • Self extinguishing, UL224 VW-1, CSA • Fast shrinking • Low shrink temperature Heat shrink tubing TCN20. Shrink Ratio Operating Temperature Longitudinal Change After Shrinkage Dielectric Strength Heat Shrinkable Tubing 2:1 PART DESCRIPTION Size (imperial) All dimensions in mm. Subject to technical changes. Further information...

Insulation Heat Shrinkable Tubing Heat shrinkable tubing 3:1 - Self extinguishing TCN20 overexpanded Mechanical and electrical protection applications for parts with high diameter variances. This fast shrinking tubing makes it suitable for high volume production. Features and benefits • Thin wall overexpanded polyolefin tubing • Self extinguishing and low shrink temperature • Highly flame-retardant, UL224 VW-1 Heat shrink tubing TCN20 overexpanded. Shrink Ratio Operating Temperature Longitudinal Change After Shrinkage Dielectric Strength Heat Shrinkable Tubing 3:1 PART DESCRIPTION All dimensions...

Insulation Heat Shrinkable Tubing Heat shrinkable tubing 2:1 - flexible and coloured HFT-A - self extinguishing This high performance thin wall tubing is used extensively for electrical and mechanical protection. It is also well proven for sleeve marking to identify wiring circuits. Features and benefits • Flexible heat shrink tubing • Fast shrinking, easy handling, good mechanical strength • Wide range of colours • Internal diameters up to 101.6 mm (4 inches) • UL-224 ,CSA listed and VG approved HFT-A conforms to major standards (VG) used in all Defence industries. Operating Temperature Longitudinal...

Insulation Heat Shrinkable Tubing Heat shrinkable tubing 2:1 - flexible and coloured TF21 Due to it's versatility TF21 is suitable for a wide range of applications like electrical insulations, mechanical protection and marking. Features and benefits • Thin wall, flexible polyolefin tubing • Fast shrinking and low shrink temperature • Meets and exceeds lots of industrial standards • Big variety of different colours and sizes • Flame retarded and UL224 VW1 listed TF21 - available in a wide range of colours and sizes. Operating Temperature Longitudinal Change After Shrinkage Dielectric Strength Cut...

Insulation Heat Shrinkable Tubing Heat shrinkable tubing 2:1 - flexible and coloured TF21 Supplied Ø D min. Size (imperial) PART DESCRIPTION All dimensions in mm. Subject to technical changes. Further information at www.HellermannTyton.com/insulation

Insulation Heat Shrinkable Tubing Heat shrinkable tubing 2:1 - flexible and coloured TF21 Heat Shrinkable Tubing 2:1 PART DESCRIPTION Size (imperial) All dimensions in mm. Subject to technical changes. Further information at www.HellermannTyton.com/insulatio

Insulation Heat Shrinkable Tubing Heat shrinkable tubing 2:1 - flexible and transparent TF24 Protects wire and cable markers subject to abuse, while permitting inspectability of each item covered. Protects electronic components while permitting their identification and inspection. Features and benefits • Transparent, flexible polyolefin tubing • Protects identification marking perfect • Halogen free • Good mechanical and chemical resistance • VG-approval and additional industrial approvals TF24 transparent tubing with 2:1 shrink ratio. Operating Temperature Longitudinal Change After Shrinkage Dielectric...

Insulation Heat Shrinkable Tubing Heat shrinkable tubing 3:1 - flexible and coloured TF31 If higher fire protection is a requirement heat shrinkable tubing TF31 is a good choice. It is used for protection, insulation and identification wires, cables and light duty harnesses. Features and benefits • Thin wall, very flexible polyolefin tubing • Few sizes cover a wide range of diameters allowing reduced inventory • Fast shrinking and low shrink temperature • Flame-retardant, UL224 VW1 listed TF31 with 3:1 shrink ratio allowing for a wider range of application. Shrink Ratio Operating Temperature Longitudinal...