Group: HellermannTyton Group
Catalog excerpts
Inspired by Paul Hellermann Heat-shrinkable tubes have always made it easy to repair cables and pipes. Strictly speaking, however, Paul Hellermann used rubber bike valves to bring the insulation of damaged household cables to a mass market from 1935. The idea is the only thing that our modern heat-shrinkable tubes have in common with these simple chloroprene sleeves. Take the SA47 (see page 252), which was specially developed in line with customer specifications and offers outstanding protection against moisture and corrosion, thus enabling vehicles to retain their functionality.
Open the catalog to page 22.1 Heat Shrinkable Tubing_ Product Selection Size Overview 200 The right Heat Shrink Tube 201 Heatshrinkable Tubing Overview 202 Thin wall ShrinKit 321 Basic - black, 3:1, cut pieces in compact kit 205 ShrinKit 321 Universal Basic, 3:1, coloured pieces in compact kit 206 ShrinKit 321 Universal, 3:1, coloured pieces in large size reusable kit 207 HIS-Service Station, bundles 210 HIS-PACK, 2:1, mini-reel in dispenser pack 210 HIS-3, 3:1, mini-reel in dispenser pack 212 HIS-3 BAG, 3:1, pre-cut pieces in blister bag 215 TCN20 overexpanded, 3:1, self extinguishing 224 HFT-A, 2:1, flexible and...
Open the catalog to page 32.2 Heat Shrinkable Moulded Shapes 5-Way Outlet Shapes Material Information Material Specifications 260 Product Selection Low Profile Boots Product Overview 262 Bulbous Boots Product Overview 263 Low Profile Boots and Transitions Helashrink 313C Series, with adapter lip 264 Helashrink 313E Series, without adapter lip 265 Helashrink 313F Series, with adapter lip 265 Helashrink 333F Series, with adapter lip, 90° angle 266 Helashrink 412H Series, side breakout 267 Helashrink 492H Series, 1 to 2 cables 268 Helashrink 573H Series, 1 to 3 cables 269 Bulbous Boots and Transitions Helashrink 150...
Open the catalog to page 4InsulationProduct Selection Overview of Applications for Heat Shrink Tubing When selecting the correct heat shrink tubing size, it is important to bear in mind the 80:20 rule. The heat shrink tubing must shrink by at least 20 % and not more than 80 % of its complete shrinkage capacity to achieve the right result. In our overview of applications you will find the best heat shrink tube for every cable diameter. The 80:20 rule has of course been taken into account in the table. Heat Shrinkable Tubing with a shrink ratio of 2:1 Heat Shrinkable Tubing with a shrink ratio of 3:1 HFT-A, TL27,...
Open the catalog to page 5Product Selection The Right Heat Shrink Tube The 80:20 rule means that a heat shrink tube should shrink by a maximum of 80 % and a minimum of 20 %. For example: A cable with a diameter of 5mm is to be wrapped in heat shrink tubing. In theory both sizes 6/2 and 12/4 would be suitable, since the required diameter of 5mm lies within the shrink range of both tube sizes. Size 6/2 Size 12/4 Maximum shrink (100 %) Maximum shrink (100 %) Optimum shrinkage min. (20 %) Optimum shrinkage min. (20 %) 5.2 Size 6/2 has a range of application of between 2.8 mm and 5.2 mm and The smallest application...
Open the catalog to page 6InsulationProduct Selection Heat Shrinkable Tubing Overview ShrinKit 321 Basic ShrinKit 321 Universal Basic ShrinKit 321 Universal ShrinKit 321-A Basic ShrinKit 321-A HIS-PACK Packaging TYPE Type VARIANT Thin-Wall Hot melt adhesive Thick-Wall Hot melt adhesive HellermannTyton Further information at www.HellermannTyton.com/insulation
Open the catalog to page 7Heat Shrinkable Tubing Overview TYPE Packaging LVK-C with connectors Medium-Wall Thin-Wall Hot melt adhesive Medium-Wall Hot melt adhesive Thin-Wall Hot melt adhesive Medium-Wall Hot melt adhesive Thick-Wall Hot melt adhesive Further information at www.HellermannTyton.com/insulation
Open the catalog to page 8InsulationProduct Selection Heat Shrinkable Tubing Overview Packaging TYPE Type HA47 Thick-Wall Hot melt adhesive Thin-Wall Hot melt adhesive Standard-Wall Hot melt adhesive Please refer to the Approvals Overview for further information, see page: 591 - 595 HellermannTyton Further information at www.HellermannTyton.com/insulation
Open the catalog to page 9Heat Shrinkable Tubing Heat shrinkable tubing 3:1 in a kit ShrinKit 321 Basic - black The compact and handy kit belongs to the basic equipment for every assembler. Its ideal shrink ratio of 3:1 replaces many differently sized tubing. Features and benefits • Compact and handy kit • Black tubing • Application range from 1 mm to 16 mm • 220 precut pieces in five sizes • Case can be re-used for storing nails, screws, nuts, fish hooks, etc. Heat Shrinkable Tubing 3:1 All dimensions in mm. Subject to technical changes. Id RoHSj/ Recommended Tools For more information on toolings please refer to...
Open the catalog to page 10Insulation Heat Shrinkable Tubing Heat shrinkable tubing 3:1 in a kit ShrinKit 321 Universal Basic With ShrinKit 321 HellermannTyton has set a new standard in heat shrink tubing: ShrinKit tubings cover many applications with their ideal shrink ratio of 3:1. Features and benefits • Compact and handy kit • Black and coloured tubing • Application range from 1 mm up to 16 mm • 177 precut pieces in five sizes • Case can be re-used for storing nails, screws, nuts, fish hooks, etc. RoHSj/ Heat Shrinkable Tubing 3:1 All dimensions in mm. Subject to technical changes. Recommended Tools For more...
Open the catalog to page 11Heat Shrinkable Tubing Heat shrinkable tubing 3:1 in a kit ShrinKit 321 Universal With ShrinKit 321 HellermannTyton has set a new standard in heat shrink tubing: ShrinKit tubings cover many applications with their ideal shrink ratio of 3:1. Features and benefits • Wide range of sizes, colours and lengths • For insulation, bend protection and identification • Case can be re-used for storing nails, screws, nuts, fish hooks, etc. • Compartment sizes changeable by simply moving yellow space dividers Id RoHSj/ Date of issue: 10/2017 Heat Shrinkable Tubing 3:1 All dimensions in mm. Subject to...
Open the catalog to page 12InsulationHeat Shrinkable Tubing Heat shrinkable tubing 3:1 in a kit ShrinKit 321-A Basic - with adhesive liner The black tubing is mainly used for environmental sealing of splices and connectors. The transparent tubing is typically used for protection of cable markers. Features and benefits • Adhesive lined heat shrink tubing • Inner wall melts when heated and is forced into gaps • Adhesive forms seal against moisture as tubing cools • Black tubes mainly for the protection of connectors and splices • Clear tubing ideal for protection of printed label markers • 130 precut pieces in three...
Open the catalog to page 13All HellermannTyton España catalogs and technical brochures
-
Resin and Gel Electrical Joints
68 Pages
-
Solutions for Wind Energy
16 Pages
-
Cable Ties and Fixings
4 Pages
-
FlexTack
6 Pages
-
solidtack-serie
2 Pages
-
TK20
2 Pages
-
HA 67
2 Pages
-
cablelok
4 Pages
-
Insulation
28 Pages
-
Cable Protection System
16 Pages
-
electrical installation
4 Pages
-
identification systems
42 Pages
-
application tooling
32 Pages
-
apendix
40 Pages
-
Global Automotive Products
364 Pages
-
RFID Solutions for Cables
12 Pages
-
Solutions for Aerospace Industry
64 Pages
-
Solutions for Food Industry
44 Pages
-
Panel Building Solutions
96 Pages
-
Solutions for Defence Market
12 Pages
-
Solutions for Railway Market
88 Pages
-
Solutions for Solar Market
8 Pages
-
Cable Ties and Fixing
170 Pages
-
Identification Systems
108 Pages
-
Electrical Installation
44 Pages
-
Cable Protection System
90 Pages