video corpo

identification systems
42Pages

{{requestButtons}}

Catalog excerpts

identification systems - 1

Technical Information Wire and Cable Markers Bonding properties of labels Shrinkable markers "Continuous Tube", thermal transfer Effect of surface energy on bonding properties TCGT – 3:1 Commercial Grade Tubing The material combination is the decisive factor Using labels with protective laminate TLFX – 2:1 Limited Fire Hazard Thermal transfer films (colour ribbons) THTT – 2:1 High Temperature Thermal transfer printing Shrinkable markers "Ladder Style", thermal transfer Identification with RFID Identification tags for cable bundle, thermal transfer TIPTAG HF – Limited Fire Hazard, Halogen free TIPTAG PU – UV-stabilised Tiptags, Polyurethane Identification tags for cable bundle "Ladder Style", thermal transfer TAGHT – High Temperature Tiptags Self-laminating labels, thermal transfer Helatag 323 (White-Transparent), high temperature Identification for marking cable bundles IT Ties – Identification ties Adhesive labels for ties, plates and tags, thermal transfer 270

Open the catalog to page 1
identification systems - 2

Identification Systems Industrial Identification Hazardous Area Identification Type label identification, thermal transfer Helatag 1204 (Silver-matt) Stainless steel printing system 271 Helatag 1206 (White gloss) M-BOSS Compact Printer M-BOSS Compact and Organiser Asset identification label, thermal transfer M-BOSS Compact Markers Identification plates for marking cable bundles HFTP PEEK for high temperature applications RFID Cable Ties and Accessories Helatag 323 (Transparent), high temperature Cable ties with integrated RFID transponder T50RFID – Low Frequency (LF) and High Frequency (HF)...

Open the catalog to page 2
identification systems - 3

Identification Systems Technical Information Bonding properties of labels The great variety of places where adhesive labels can be used require a broad range of different materials and adhesives. The information given below will explain all the important aspects of this adhesion. To enable you to make the right choice for your particular application quickly and efficiently, we have set out the most important selection criteria diagrammatically in our flowchart. Initial and final bonding In principle there are two different bonding conditions for labels: The initial bonding which occurs...

Open the catalog to page 3
identification systems - 4

Identification Systems Technical Information Effect of surface energy on bonding properties The surface energy (also known as surface tension) is an important factor in the selection of the right adhesive. Because of their chemical formulation, all surfaces have their own polarity and surface tension. The cause of surface tensions is the tendency of liquids to reduce their surface as far as possible, thus to form drops. When a surface which is to be marked (substrate) is wetted with an adhesive, in addition to the adhesive formulation and the surface quality (material, roughness, dampness...

Open the catalog to page 4
identification systems - 5

Identification Systems Technical Information Instructions for using labels with protective laminate Labels with protective laminate (also known as cable laminators) have a white or coloured label field which can be written on either manually using a marker pen (see RiteOn and HELASIGN) or using a matrix, laser or thermal transfer printer (see Helatag). Depending on the design for the respective type of printing, the title block has a special surface finish to achieve the optimum print anchorage to the label substrate. This results in long-lasting, clear, sharp writing with text, graphics or...

Open the catalog to page 5
identification systems - 6

Identification Systems Technical Information Interesting facts about thermal transfer films (colour ribbons) The thermal transfer ribbon is perhaps the most important consumable that is used in this printing system - using the right ribbon for a particular application is extremely important. Not every transfer ribbon is equally suited to any purpose. Depending on the printing requirements (e.g. smudge or scratchproof) to be met, what type of labels will be used, an appropriate thermal transfer ribbon must be used. Another important consideration for the thermal transfer ribbon is the...

Open the catalog to page 6
identification systems - 7

Identification Systems Technical Information Data Reader Application/ Database Radio frequency identification, for short RFID, simply means the identification by radio waves. The data transfer is affected by means of electromagnetic waves. This technology allows a contactless storing and reading of data and makes a communication between devices possible. There are several methods of identification, but the most common is to store a serial number that identifies a person or object, and perhaps other information, on a microchip that is attached to an antenna (the chip and the antenna together are...

Open the catalog to page 7
identification systems - 8

Identification Systems Wire and Cable Markers Shrinkable markers, "Continuous Tube", thermal transfer TCGT – 3:1 Commercial Grade TCGT is a commercial grade 3:1 heat shrink marker material supplied as a continuous tube and printable on both sides. TCGT’s polyolefin compound has good mechanical strength and resistance to organic solvents and chemicals. The surface of the tubing has been especially prepared so that print performance is excellent at all times. HellermannTyton's printer range allow users to create a high quality print. In addition it is possible to either perforate the tubing at...

Open the catalog to page 8
identification systems - 9

Identification Systems Wire and Cable Markers Shrinkable markers, "Continuous Tube", thermal transfer TCGT – 3:1 Commercial Grade PART DESCRIPTION All dimensions in mm. Subject to technical changes. More colours on request. Further information at www.HellermannTyton.com/identificat

Open the catalog to page 9
identification systems - 10

Identification Systems Wire and Cable Markers Shrinkable markers "Continuous Tube", thermal transfer TULT – 3:1 TULT is a UL recognized 3:1 heat shrink marker material supplied as a continuous tube and printable on both sides. TULT’s polyolefin compound has good mechanical strength and resistance to organic solvents and chemicals. The surface of the tubing has been especially prepared so that print performance is excellent at all times. HellermannTyton's printer range allow users to create a high quality print. In addition it is possible to either perforate the tubing at predetermined...

Open the catalog to page 10

All HellermannTyton España catalogs and technical brochures

  1. FlexTack

    6 Pages

  2. TK20

    2 Pages

  3. HA 67

    2 Pages

  4. cablelok

    4 Pages

  5. Insulation

    28 Pages

  6. apendix

    40 Pages

  7. Insulation

    98 Pages