Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. HELLER MAQUINA HERRAMIENTA, S.L.
  3. HELLER CATALOGUES

HELLER CATALOGUES

HELLER CATALOGUES
1 / 64 PagesView full catalog

HELLER CATALOGUES

Product catalog summary
Technical Specifications Summary
General Specifications:
  • Cross slide travel: 200 mm
  • Charriot travel: 95 mm
  • Max tool dimensions: 16 x 16 mm
Tailstock:
  • Diameter of tailstock quill: 40 mm
  • Travel of tailstock quill: 100 mm
  • Morse taper: CM 3
Motor:
  • Main motor power: 2.2 Kw
  • Motor pump power: 0.075 Kw
Dimensions and Weight:
  • Overall dimensions: 1850 x 800 x 1280 mm
  • Net weight: 750 Kg
Lathe Models CE660E:
  • Distance between centers: 1500, 2000, 3000 mm
  • Swing over bed: 660 mm
  • Swing over gap: 870 mm
  • Swing over carriage: 420 mm
  • Spindle bore: 105 mm
  • Speeds range of spindle: 36-1600 rpm
  • Number of speeds: 12
Feeds and Pitches:
  • Longitudinal feeds: 0.028-6.43 mm/rev
  • Cross feeds: 0.012-2.73 mm/rev
  • Metric pitch: 1-14 mm/22
  • Whitworth pitch per inch: 28-2
  • Modular pitch: 0.5-7
  • Diametral pitch: 56-4
Carriage:
  • Cross slide travel: 310 mm
  • Charriot travel: 145 mm
  • Max tool dimensions: 25 x 25 mm
Tailstock:
  • Diameter of tailstock quill: 75 mm
  • Travel of tailstock quill: 150 mm
  • Morse taper: CM 5
Motor:
  • Main motor power: 7.5 Kw (10 Hp)
  • Motor pump power: 0.09 Kw
Dimensions and Weight:
  • Overall dimensions: 3000 x 1100 x 1450 mm to 4500 x 1100 x 1450 mm
  • Net weight: 3500 Kg to 4500 Kg
Standard Equipment:
  • FAGOR X, Y visualizer
  • Universal 3-jaw chuck Ø 315 mm
  • Independent 4-jaw chuck Ø 400 mm
  • Pass-through chuck Ø 250 mm
  • Fixed and mobile steady rests
  • Flat plate
  • Stop bar
  • Chip guard
  • Spindle cover
  • Quick-change turret with 4 holders
  • Taper copier
  • Cooling equipment
  • Work light
  • Toolbox
  • CE certificate
Additional Models and Specifications:
  • CE660X1500 VCC to CE660X3000 VCC
  • High of centers: 330 mm
  • Distance between centers: 1500 mm to 3000 mm
  • Swing over bed: 660 mm
  • Swing over gap: 820 mm
  • Swing over carriage: 420 mm
  • Width of bed: 390 mm
  • Gap length: 330 mm
  • Spindle bore: 105 mm
  • Spindle nose: CAMLOCK nº 8
  • Morse taper of main spindle: CM7
  • Speeds range of spindle: 25-1300 rpm
  • Number of speeds: 4 Variable
Feeds and Pitches:
  • Longitudinal feeds: 0.063-2.52 mm/rev
  • Cross feeds: 0.027-1.07 mm/rev
  • Metric pitch: 0.5-7
  • Whitworth pitch per inch: 28-2
  • Modular pitch: 1-14
  • Diametral pitch: 0.5-7
  • Pattern spindle pitch: Ø 40x12DP
Carriage:
  • Cross slide travel: 320 mm
  • Charriot travel: 150 mm
  • Max tool dimensions: 32 x 32 mm
Tailstock:
  • Diameter of tailstock quill: 75 mm
  • Travel of tailstock quill: 150 mm
  • Morse taper: CM5
Motor:
  • Main motor power: 7.5 Kw
  • Motor pump power: 0.09 Kw
Dimensions and Weight:
  • Overall dimensions: 4500 x 1130 x 1630 mm
  • Net weight: 3500 Kg
Standard Equipment:
  • Universal 3-jaw chuck Ø 315 mm
  • Independent 4-jaw chuck Ø 500 mm
  • Flat plate Ø 630 mm
  • FAGOR X, Y visualizer
  • Electronic variator
  • Fixed and mobile steady rests
  • Quick-change turret with 4 holders
  • Taper copier
  • Thread indicator
  • Cast iron legs
  • Cooling equipment
  • Work lamp
  • Toolbox
  • CE certificate
Large Parallel Lathe:
  • High of centers: 550 mm
  • Distance between centers: 1500 mm to 11000 mm
  • Swing over bed: 1100 mm
  • Swing over gap: 1300 mm
  • Swing over carriage: 800 mm
  • Width of bed: 600 mm
  • Gap length: 420 mm
See more

Catalog excerpts

HELLER CATALOGUES-1

www.follow.bz www.heller.es

 Open the catalog to page 1
HELLER CATALOGUES-2

BY c/ Nicolás Copérnico. Elche (Alicante) c/ Nicolás de Bussi nº44. Elche (Alicante) www.follow.bz www.heller.es After-sales service

 Open the catalog to page 2
HELLER CATALOGUES-3

4 14 24 30 44 48 51 55 58 59 MILLING MACHINES LATHES GRINDING MACHINES DRILLING MACHINES SLOTTING MACHINES CNC LATHES VERTICAL MACHINING CENTERS MICRO CNC HYDRAULIC SHEARS HYDRAULIC PRESS BRAKES

 Open the catalog to page 3
HELLER CATALOGUES-4

www.follow.bz VISUALIZADOR FAGOR FCM 2000 MESA Superficie de trabajo(mm) 600X2000 Worktable surface (mm) TABLE Ranuras en T (mm) 5X18 Number T-slot (mm) Peso máximo admitido sobre mesa (Kg) 1800 Maximun weight over table (Kg) RECORRIDOS Longitudinal (mm) 1500 Longitudinal (mm) TRAVELLING Transversal (mm) 700 Cross (mm) Vertical (mm) 500 Vertical (mm) AVANCES Avances de la mesa VARIADOR/INVERTER Table movements FEEDS Longitudinal (mm/min) 10-1000 Longitudinal (mm/min) Transversal (mm/min) 5-500 Cross (mm/min) Vertical (mm) 10-1000 Vertical (mm) Rápidos longitudinal y transversal (mm/min) 2200...

 Open the catalog to page 4
HELLER CATALOGUES-5

www.follow.bz FRESADORA UNIVERSAL FU 2000 MESA Superficie de trabajo(mm) 350X1850 Worktable surface (mm) TABLE Ranuras en T (mm) 5X16 Number T- Slot (mm) Giro de mesa ±45° Table turning Peso máximo admitido sobre mesa (Kg) 700 Maximun weight over table RECORRIDOS Longitudinal (mm) 1500 Longitudinal (mm) TRAVELING Transversal (mm) 400 Cross Vertical (mm) 460 Vertical (mm) AVANCES Avances de la mesa VARIADOR/INVERTER Table movements FEEDS Longitudinal (mm/min) 0-1500 Longitudinal (mm/min) Transversal (mm/min) 0-1500 Cross (mm/min) Vertical (mm) 0-1500 Vertical (mm) Rápidos longitudinal y transversal...

 Open the catalog to page 5
HELLER CATALOGUES-6

www.follow.bz VISUALIZADOR FAGOR FRESADORA VERTICAL FU1400 MESA Superficie de trabajo(mm) 1400X400 Worktable surface (mm) TABLE Ranuras en T (mm) 3X18 Number T- Slot (mm) Peso máximo admitido sobre mesa (Kg) 500 Table turning RECORRIDOS Longitudinal (mm) 800 Longitudinal (mm) TRAVELING Transversal (mm) 400 Cross (mm) Vertical (mm) 500 Vertical (mm) AVANCES Longitudinal (mm/min) (9)18-627 Longitudinal (mm) FEEDS Transversal (mm/min) (9) 18-627 Cross (mm/min) Vertical (mm) 1670 Vertical (mm) CABEZAL DEL CARNERO Cono ISO 50 Taper RAM HEADSTOCK Gama de velocidades (rpm) 18-1800 Range of speeds (rpm)...

 Open the catalog to page 6
HELLER CATALOGUES-7

www.follow.bz VISUALIZADOR FAGOR FRESADORA UNIVERSAL FU 1250 MESA Superficie de trabajo(mm) 1250X320 Worktable surface (mm) TABLE Ranuras en T (mm) 3x16 Number T-slot (mm) Peso máximo admitido sobre mesa (Kg) 200 Maximum weight over table (Kg) RECORRIDOS Longitudinal (mm) 985 Longitudinal (mm) Transversal (mm) 250 Cross (mm) TRAVELLING Vertical (mm) 500 Vertical (mm) AVANCES Avances de la mesa AUTOMATICO/AUTOMATIC Table movements FEEDS Longitudinal (mm/min) (8)30-740 Longitudinal (mm/min) Transversal (mm/min) (8)30-740 Cross (mm/min) Vertical (mm) MOTORIZADO/POWERED Vertical (mm) Rápidos longitudinal...

 Open the catalog to page 7
HELLER CATALOGUES-8

www.follow.bz VISUALIZADOR FAGOR FRESADORA UNIVERSAL FU1120(1250) MESA Superficie de trabajo(mm) 1250 x 260 Worktable surface (mm) TABLE Ranuras en T (mm) 3 x 14 Number T-slot (mm) Peso máximo admitido sobre mesa (Kg) 200 Maximun weight over table (Kg) RECORRIDOS Longitudinal (mm) 800 Longitudinal (mm) TRAVELING Transversal (mm) 290 Cross (mm) Vertical (mm) 370 Vertical (mm) AVANCES Avances de la mesa AUTOMÁTICOS / POWERED Table feed FEED Longitudinal (mm) (8) 15 - 370 Longitudinal (mm/min) Transversal (mm/min) (8) 15 - 370 Cross (mm/min) Rápidos vertical (mm/min) 600 Vertical rapid movement...

 Open the catalog to page 8
HELLER CATALOGUES-10

www.follow.bz VISUALIZADOR FAGOR GUÍAS VERTICALES TEMPLADAS FTV3 MESA Superficie de trabajo(mm) 1370X254 Worktable surface (mm) TABLE Ranuras en T (mm) 3X16 Number T-slot (mm) Peso máximo admitido sobre mesa (Kg) 340 Maximun weight over table (Kg) RECORRIDOS Longitudinal (mm) 914 Longitudinal (mm) TRAVELLING Transversal (mm) 400 Cross (mm) Vertical (mm) 450 Vertical (mm) AVANCES Longitudinal (mm/min) 33-700 Longitudinal (mm/min) FEED Transversal (mm/min) 33-700 Cross (mm/min) Vertical (mm) 290 Vertical (mm) Rápidos longitudinal y transversal (mm/min) 700 Longitudinal and cross rapid movement...

 Open the catalog to page 10
HELLER CATALOGUES-11

www.follow.bz VISUALIZADOR FAGOR FRESADORA DE TORRETA VERTICAL FTV2 MESA Superficie de trabajo(mm) 1246X230 Worktable surface (mm) Ranuras en T (mm) 3X16 Number T-slot (mm) TABLE Peso máximo admitido sobre mesa (Kg) 300 Maximun weight over table (Kg) RECORRIDOS Longitudinal (mm) 838 Longitudinal (mm) Transversal (mm) 305 Cross (mm) TRAVELLING Vertical (mm) 407 Vertical (mm) AVANCES Longitudinal (mm/min) 33-700 Longitudinal (mm/min) FEED Rápidos longitudinal y transversal (mm/min) 700 Rapid longitudinal (mm/min) CABEZAL DEL CARNERO Cono ISO40 Taper RAM HEADSTOCK Gama de velocidades (rpm) 60-4200...

 Open the catalog to page 11
HELLER CATALOGUES-12

www.follow.bz VISUALIZADOR FAGOR COMBINADA EJES PORTAFRESAS EQUIPAMIENTO ESTÁNDAR Visualizador FAGOR X, Y, Z Movimientos automáticos X-Y Movimientos rápidos X-Y-Z Bajada de la caña automática Eje porta-fresas Ø22 x 500 Eje porta-fresas Ø27 x 500 Porta-pinzas ISO 40 Cono reductor ISO 40 A CM3 Cono reductor ISO 40 A CM2 Cono ISO 40 para portabrocas Portabrocas capacidad 3-16 Mordaza mecánica 160mm con base giratoria 1 luneta Bomba de engrase manual Bandeja recogida de refrigerante Equipo de refrigeración Lámpara de trabajo Caja de herramientas Certificado CE FTC1250 MESA Superficie de trabajo(mm)...

 Open the catalog to page 12
HELLER CATALOGUES-13

www.follow.bz VISUALIZADOR FAGOR FRESADORA DE TORRETA VERTICAL COMBINADA FTVC-6 MESA Superficie de trabajo(mm) 1520X305 Worktable surface (mm) TABLE Ranuras en T (mm) 3X16 Number T-slot (mm) Peso máximo admitido sobre mesa (Kg) 400 Maximun weight over table (Kg) RECORRIDOS Longitudinal (mm) 820 Longitudinal (mm) Transversal (mm) 410 Cross (mm) TRAVELLING Vertical (mm) 360 Vertical (mm) AVANCES Longitudinal (mm/min) 0-1200 Longitudinal (mm/min) FEEDS Transversal (mm/min) 0-1200 Cross (mm/min) Vertical (mm/min) 0-400 Vertical (mm/min) Rápidos longitudinal y transversal (mm/min) 1200 Longitudinal...

 Open the catalog to page 13

All HELLER MAQUINA HERRAMIENTA, S.L. catalogs and technical brochures

  1. catalogue 2012
    catalogue 2012

    144  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.