*mydirectindustry

1913 MARKIII

Product catalog summary

Heller Reflow Oven Specifications Overview

Model Variants: 1913 MARKIII (Air) and 1913 MARKIII (Nitrogen)

Electric Supply: Both models require a standard power input of 480 volts with a breaker size of 100 amps. They operate at 9.5 - 13.5 kW continuously and have a typical run current of 30 - 35 amps. Optional power inputs are available for various voltages, and they support 50/60 Hz frequency.

Dimensions and Weight: Both models have an overall length of 232 inches, width of 54 inches, and height of 63 inches. The typical net weight is 3500 lbs for the Air model and 4500 lbs for the Nitrogen model.

Computer Control: Equipped with AMD or Intel-based computers, these ovens offer recipe storage for over 500 recipes, feature a flat screen monitor, and run on Windows XP®. They include auto start software, data logging, and password protection.

Inert Atmosphere (Nitrogen Model): Features include a minimum oxygen level of 10-25 PPM, nitrogen cooling, and optional systems like waterless cooling with flux separation, nitrogen on/off valve, and oxygen monitoring.

Additional Features: Both models come with KIC/ECD profiling software, signal light tower, powered hood lift, and five thermocouple profiling. Optional features include redundant alarm sensors, board drop sensor, and custom engineering.

Mesh Belt Conveyor: The conveyor height from the floor is 35.5 inches, with a maximum PCB width of 20 inches for the Air model and 24 inches for the Nitrogen model. The conveyor speed is up to 74 inches per minute.

Temperature Control: The ovens have a temperature range of 25-350°C, with optional high temperatures up to 450°C. They feature instant response open coil heaters made of Nichrome, with a profile change time of 5-15 minutes.

Cooling Systems: The Air model has 3 cooling zones, while the Nitrogen model has 4. Optional external cooling zones and water cooling are available.

Notes: Specifications are subject to change as part of continuous product improvement. Optional features are marked as 'O' and standard features as 'S'.

Catalog excerpts

HELLER INDUSTRIES, INC. Model Electric Supply Power Input (3 Phase) Standard Breaker Size kW Typical Run Current Optional Power Inputs Available Frequency Sequential Zone Turn On Single Phase Operation Dimensions Overall Length Overall Width Overall Height Typical Net Weight Typical Shipping Weight (Domestic) Typical Shipping Weight (Export) Computer Control AMD or Intel Based Computer Recipe Storage Flat Screen Monitor Windows Operating System Monitor mount Auto Start Software Data Logging Password Protection LAN Networking Inert Atmosphere Minimum PPM Oxygen Nitrogen Cooling Waterless Cooling w/ Flux Separation System Nitrogen On/Off Valve Oxygen Monitoring System Nitrogen Standby System Sample Port in Reflow Typical Nitrogen Consumption Additional Features KIC / ECD Profiling Software Signal Light Tower Powered Hood Lift Five (5)Thermocouple Profiling 30” Heater Modules Redundant Alarm Sensors Independent Alarm Scanner KIC Profiler / ECD Profiler Center Board Support Board Drop Sensor Board Counter Bar Code Reader Custom Paint & Decal Battery Backup for Conveyor and PC GEM/SECS Interfacing Custom Engineering and Software Heller Reflow Oven Specifications 1913 MARKIII (Air) * Varies depending on Options included with the oven ** Tested at 500 PPM. Varies with PCB size and oven configuration Specifications Continue on Reverse

Open the catalog to page 1

HELLER INDUSTRIES, INC. Model Mesh Belt Conveyor Height From Floor Maximum PCB Width ** Requires 30” Heater Modules Space Required Between PCB's Conveyor Length On-Load Conveyor Length Off-Load Heated Tunnel Length Process Clearance Above Mesh Belt Mesh Belt Pitch Maximum Conveyor Speed Conveyor Direction Left to Right Conveyor Direction Right to Left Conveyor Speed Control Type Edge Hold Conveyor System Option Height from Floor – Standard Height from Floor – Optional Clearance Above Conveyor Pins Clearance Below Conveyor Pins Length of PCB Support Pins 3 mm long support pins Minimum/Maximum...

Open the catalog to page 2

1913 MARKIII

1913 MARKIII

Catalog excerpts

All Heller Industries catalogs and technical brochures