*mydirectindustry

1707 MARKIII

Product catalog summary

Heller Reflow Oven Specifications Overview

Model Variants: 1707 MARKIII (Air) and 1707 MARKIII (Nitrogen)

Electric Supply: Both models require a 3-phase power input of 208/240 volts with a breaker size of 100 amps at 480 volts. The power consumption ranges from 7.5 to 9.5 kW continuously, with a typical run current of 15-20 amps at 480 volts. Optional power inputs are available for various voltages, and the frequency is 50/60 Hz.

Dimensions and Weight: The ovens have an overall length of 134 inches, width of 54 inches, and height of 63 inches. The typical net weight is 3000 lbs, with shipping weights varying for domestic (3500 lbs) and export (4000 lbs) shipments.

Computer Control: Both models feature an AMD or Intel-based computer with recipe storage for over 500 recipes, a flat-screen monitor, Windows XP operating system, and various software features including auto start, data logging, and password protection. LAN networking is optional.

Inert Atmosphere (Nitrogen Model): The nitrogen model includes features like minimum PPM oxygen levels of 10-25, nitrogen cooling, and optional systems for waterless cooling, nitrogen on/off valve, oxygen monitoring, and standby systems.

Additional Features: Standard features include KIC/ECD profiling software, signal light tower, powered hood lift, and five thermocouple profiling. Optional features include 30” heater modules, redundant alarm sensors, and custom engineering.

Mesh Belt Conveyor: The conveyor height is 35.5 inches from the floor, with a maximum PCB width of 20 inches for the air model and 24 inches for the nitrogen model. The conveyor speed is controlled by a closed-loop system, with a maximum speed of 74 inches per minute.

Forced Convection Zones: Both models have seven top and bottom forced convection zones with instant response open coil heaters made of Nichrome. The temperature range is 25-350°C, with optional high temperatures up to 450°C.

Cooling Systems: Standard cooling includes one zone, with optional additional external cooling zones and waterless cooling for the nitrogen model.

Notes: Specifications are subject to change as part of continuous product improvement. Optional features are marked with 'O' and standard features with 'S'.

Catalog excerpts

HELLER INDUSTRIES, INC. Model Electric Supply Power Input (3 Phase) Standard Breaker Size kW Typical Run Current Optional Power Inputs Available Frequency Sequential Zone Turn On Single Phase Operation Dimensions Overall Length Overall Width Overall Height Typical Net Weight Typical Shipping Weight (Domestic) Typical Shipping Weight (Export) Computer Control AMD or Intel Based Computer Recipe Storage Flat Screen Monitor Windows Operating System Monitor mount Auto Start Software Data Logging Password Protection LAN Networking Inert Atmosphere Minimum PPM Oxygen Nitrogen Cooling Waterless Cooling w/ Flux Separation System Nitrogen On/Off Valve Oxygen Monitoring System Nitrogen Standby System Sample Port in Reflow Typical Nitrogen Consumption Additional Features KIC / ECD Profiling Software Signal Light Tower Powered Hood Lift Five (5)Thermocouple Profiling 30” Heater Modules Redundant Alarm Sensors Independent Alarm Scanner KIC Profiler / ECD Profiler Center Board Support Board Drop Sensor Board Counter Bar Code Reader Custom Paint & Decal Battery Backup for Conveyor and PC GEM/SECS Interfacing Custom Engineering and Software Heller Reflow Oven Specifications 1707 MARKIII (Air) * Varies depending on Options included with the oven ** Tested at 500 PPM. Varies with PCB size and oven configuration Specifications Continue on Reverse

Open the catalog to page 1

HELLER INDUSTRIES, INC. Model Mesh Belt Conveyor Height From Floor Maximum PCB Width ** Requires 30” Heater Modules Space Required Between PCB's Conveyor Length On-Load Conveyor Length Off-Load Heated Tunnel Length Process Clearance Above Mesh Belt Mesh Belt Pitch Maximum Conveyor Speed Conveyor Direction Left to Right Conveyor Direction Right to Left Conveyor Speed Control Type Edge Hold Conveyor System Option Height from Floor – Standard Height from Floor – Optional Clearance Above Conveyor Pins Clearance Below Conveyor Pins Length of PCB Support Pins 3 mm long support pins Minimum/Maximum...

Open the catalog to page 2

1707 MARKIII

1707 MARKIII

Catalog excerpts

All Heller Industries catalogs and technical brochures