- Catalogs
- Heliospectra AB
- ADELPHI
ADELPHI
ADELPHI
The ADELPHI Wireless Connectivity Module is designed for wireless dimming and control in greenhouse facilities. It integrates with helioCORE to optimize energy costs, enhance crop quality, and maximize ROI through setting DLI targets and zone light strategies.
Key Features
- Wireless Control: Enables true wireless dimming and control without additional wiring, saving time and money.
- helioCORE Integration: Allows automated light strategies and real-time adjustments using sensors.
- Fall-Back Schedule: Ensures safe crop production during power or network failures.
Physical Specifications
- Weight: 0.11 kg (0.25 lbs)
- Dimensions: 69x52x31 mm (2.72x2.05x1.22 in)
- Operating Temperature: -10 to 45 °C (14 to 113 °F)
- Storage Temperature: -20 to 70 °C (-4 to 158 °F)
- IP Rating: IP66, IP67
- Housing Material: PA66, Epoxy
Electrical Specifications
- Input Power: 2.4 W
- Input Voltage: 12VDC
- Output: 0-10V PWM, 2000Hz
- Control: WiFi
- Connector: M19 push lock 4-pin
Operation
- Standalone/Setup: Connect to a PSU, configure via WiFi network 'HelioConfig' with password 'Conf5600K'. Access configuration through a browser.
- With helioCORE: Use the 'find light' feature to assign devices to light groups.
Contact Information
Heliospectra AB
Phone: SE: +46 31 40 67 10, NA: +1 888 942 4769, JP: +81 3 4405 3536
Email: [email protected]
Website: www.heliospectra.com
Catalog excerpts
ADELPHI Wireless connectivity module Our NEW Wireless Connector allows for true wireless dimming and control in your greenhouse facility. Integration with helioCORE enables you to set DLI targets and zone light strategies over time, lowering your energy cost, increasing crop quality, and maximizing ROI. Fall-Back Schedule Integration with helioCORE and sensors allow for automated light strategies and real-time light adjustments. No extra wiring needed during installation, saving your money and time. To protect against power issues and network failures, a fall-back schedule guarantees safe and secure crop production according to your settings and standards.
Open the catalog to page 1
ADELPHI Wireless connectivity module Our NEW Wireless Connector allows for true wireless dimming and control in your greenhouse facility. Integration with helioCORE enables you to set DLI targets and zone light strategies over time, lowering your energy cost, increasing crop quality, and maximizing ROI. Fall-Back Schedule Integration with helioCORE and sensors allow for automated light strategies and real-time light adjustments. No extra wiring needed during installation, saving your money and time. To protect against power issues and network failures, a fall-back schedule guarantees safe and...
Open the catalog to page 2
Wireless connectivity module PHYSICAL Weight Connect the device to a compatible PSU. After powerup the device will attempt to connect to WiFi network with the SSID HelioConfig and Password Conf5600K. Access the configuration/operation page by opening a browser on a pc/mobile device on the same network identify the IP allocated to the device via the router homepage and entering the device IP in a browser. Housing material Compliance Warranty WITH HELIOCORE Go to lights, press find light. The device(s) should now be listed and available to be assigned to light groups. Factory Reset (Hold for 10...
Open the catalog to page 3
