Catalogs >
Heitec Heisskanaltechnik >
TYP 03.33.02-128

TYP 03.33.02-128
2Pages

Catalog excerpts

Temperature-controler, 2-128 control circuits Based on several years of close co-operation with the plastics Industry the established series MCS introduces new features in a new design at an attractive price-performance ratio as ever before. The more compact hot-runner controllers combine technology state-of-the-art with high level operation comfort and increased service capability. A three-side illuminated LED-strip signalises three different operation states widely visible. • Steel housing IP20 by 2 variations • Construction for different heights • Designed for 2 to 128 control- zones, 256 or more zones with operation monitor MCS control-2 • From 33 control-zones with 3 service-friendly doors • From 65 control-zones standard with feed rolls •Alarm-outputs (isolated) via multi-pin plug • Parallel heater-current supervision • NSS (fused sensor-inputs against net-voltage >10V) • Power supply via CEE-connector, cable length 3 m • Safety power OFF, main relay400 V/50/60Hz • Digital control inputs 24 VDC •Multi-pin connectors, according to customer's demand or standard sensor and heater separated • Temperature detection each 250 ms up to 128 zones •Alarms for Low-temperature, High-temperature, broken sensor, shorted sensor, changed polarity, system fault, current deviation, output rate supervision • Individual alarm delay • Outputs pulsed or phase angle controlled, automatic or manually selectable • Diagnosis program to detect external wiring mistakes • Leakage current supervision with intelligent dry-out routine • Controlled by micro-processor for up to 128 control loops in • Parameter level locked by password • Robust self optimising control • Self tuning to enable • Soft-start-function with automatic dry-out at 100"C/212°F, if • Setpoint programs, 6 individual including all parameters • Manual mode in case of broken sensor, manually or automatic, following mean values or reference-zones • Thermocouple inputs Fe-CuNi; in option Pt100/2L • Groups for multiple operation • Monitor zones for additional temperature supervision • Selection °C/°F • Supervision of output rate against nominal values • Combined heating • Power supervisio

Open the catalog to page 1

• Easy operation, three variations of display available, foil- keys, multi-line LC-display with data wheel or touch • Separate indication with comparison setpoint/actual value • Selection of up to 6 individual groups of zones • Single indicators for all zones including control mode and group-selection, selectable for setpoints, actual values, deviations, output rates and current values • Illuminated LED- strip for 3 different states • Failure protocol via display •Help menu via display The combined heating routine avoids unequal heating of the different components to reach the set point...

Open the catalog to page 2

TYP 03.33.02-128 2Pages

Catalog excerpts

All Heitec Heisskanaltechnik catalogs and technical brochures

TYP 03.33.02-128
2Pages