flexibility of our hot-channel controllers is a permanent task. Close relations to our customers in synthetic materials industry enable us to discuss, define and to The result is the MCS+ series additional to the series MCS. A special feature: the controllers e.g. MCS10+ or MCS15+ are fit simply stacking of max. 6 units will allow to build controllers with up to 90 control loops. The external bus interface serves common features like leakage current detection, combined heating etc. The number of channels may increase in steps of max. 15 according to the tool. So the number of unused channels may be reduced to a minimum and even be used for another tool. All MCS+ devices that should be connected to one control unit are stacked. robust mechanical lower device (interface cables A code switch on the rear panel sets the internal ranking of the "new" controller unit. The devices must be adressed in consecutive order beginning with "0". The "0" device is the master. All operation is done by the master. The operation panels of the salves "1", "2" a.s.o. To ensure, that the master may detect all slaves of the compute unit, the master has to All other features of the series MCS (electrical, mechanical and control specifications) are available in the MCS product information.