KIPP LOCKINGelements
28Pages

{{requestButtons}}

Catalog excerpts

KIPP LOCKINGelements - 1

Clamping Technology Standard Elements Operating Parts

Open the catalog to page 1
KIPP LOCKINGelements - 3

PRODUKTGROUPS Quarter-turn clamp locks grip plastic or stainless steel 6 Quarter-turn clamp locks flat stainless steel 7 Clamping plates for quarter-turn clamp locks 8 Ball lock pin stainless steel 11 Ball lock pin without head 12 Ball lock pin with twist knob 13 Locating bush for ball lock pin 14 Ball lock bushes 16 Ball lock bushes with twist lock 17 Locking pin for ball lock bushes 18 Sliding clamp for slotted holes 22 Shim plates for sliding clamp for slotted hole 23 Sliding clamp for square bars 24 Base plates for sliding clamp for square bars 25...

Open the catalog to page 3
KIPP LOCKINGelements - 5

Technical Information for quarter-turn clamp lock and clamping plate K1061 + K1062 click clamped Make sure that the knob is in the “OFF” position. Insert the pin for the quarter-turn clamp lock into the clamping plate. 2. Function: The knob is linked to the pin via an axle. When connecting the quarter-turn clamp lock and clamping plate, the pin engages with the clamping plate when it is turned and clamps the components. To lock components, turn the knob to the “ON” position. A click signals the opening/closing. spring plate Application examples: Altering camera positions clamping plate...

Open the catalog to page 5
KIPP LOCKINGelements - 6

Form B mounting option Quarter-turn clamp locks grip plastic or stainless steel Form A mounting option Material: Housing steel. Pin stainless steel. Knob stainless steel or thermoplastic PA (polyamide) Version: Housing nickel-plated. Pin bright. Knob reinforced PA fibreglass, black. Knob stainless steel, bright. Sample order: K1061.516 Note: M2 or M3 mounting screws are supplied. Form A mounting option for plate thickness 6 or 12 mm. Form B mounting option for plate thickness 6 to 20 mm. Accessories: Clamping plates K1062 pullout force ^clamping force KIPP Quarter-turn clamp locks, grip...

Open the catalog to page 6
KIPP LOCKINGelements - 7

stainless steel Form A mounting option Form B mounting option Material: Housing steel. Pin stainless steel. Knob stainless steel. Version: Housing nickel-plated. Pin bright. Knob stainless steel, bright. Sample order: K1061.5162 Note: M2 or M3 mounting screws are supplied. Form A mounting option for plate thickness 6 or 12 mm. Form B mounting option for plate thickness 6 to 20 mm. Accessories: Clamping plates K1062 pullout force KIPP Quarter-turn clamp locks, flat, stainless steel KIPP Quarter-turn clamp lock, technical information Shearing force Pullout force Temperature

Open the catalog to page 7
KIPP LOCKINGelements - 8

Clamping plates for quarter-turn clamp locks Form B Clamping plate recessed for plate thickness > 10 mm Material: Housing steel. Nut stainless steel. Version: Housing nickel-plated. Nut bright. Sample order: K1062.50 Note: M2 or M3 mounting screws are supplied. Form A mounting option for plate thickness 6 to 10 mm. Form B mounting option for plate thickness over 10 mm. KIPP Clamping plates for quarter-turn clamp locks Clamping plate Clamping plate for screw to

Open the catalog to page 8
KIPP LOCKINGelements - 9

Technical information for ball lock pins K1063, K1064 and locating bushes K1065 Note: These are designed to quickly clamp 2 plates. The system can be used for changing mechanisms in assembly applications or for making other manual adjustments, such as conversions in automatic systems. Repeat accuracy of ± 0.25 for screwed-in and pushed-in version. The repeat accuracy can be increased with the aid of additional locating pins. With the knob pressed down, insert the ball lock pin into the locating bush. Release the knob to clamp the plates. To remove, press the knob down and pull the ball lock...

Open the catalog to page 9
KIPP LOCKINGelements - 10

Ball lock pins Mounting dimensions Screw-in ball lock pin Material: Housing and push button steel. Ball, spring and snap ring stainless steel. O-ring FKM. Version: Housing nickel-plated. Knob tempered and nickel-plated. Ball tempered. Sample order: K1063.621 Note: Installation dimensions for Form A for plate thickness 6 mm. Installation dimensions for Form B for plate thickness 6 to 16 mm. Attention: The specified pullout forces only apply in conjunction with locating bush K1065. Accessories: Locating bush K1065. KIPP Ball lock pin KIPP Ball lock pin, technical information Order No....

Open the catalog to page 10
KIPP LOCKINGelements - 11

Ball lock pins stainless steel D2 Material: Housing and push button stainless steel. Ball, spring and snap ring stainless steel. O-ring FKM. Version: Housing bright. Push button bright. Ball tempered. Sample order: K1063.6211 Note: Installation dimensions for Form A for plate thickness 6 mm. Installation dimensions for Form B for plate thickness 6 to 16 mm. Mounting dimensions Screw-in ball lock pin Attention: The specified pullout forces only apply in conjunction with locating bush K1065. Accessories: Locating bush K1065. Push-in ball lock pin Form A Form B KIPP Ball lock pin stainless...

Open the catalog to page 11
KIPP LOCKINGelements - 12

Ball lock pins without head D2 Material: Housing and push button steel. Ball, spring and snap ring stainless steel. O-ring FKM. Version: Housing nickel-plated. Knob tempered and nickel-plated. Ball tempered. Sample order: K1063.10242 Note: Installation dimensions for Form A for plate thickness 6 mm. Installation dimensions for Form B for plate thickness 6 to 16 mm. Attention: The specified pullout forces only apply in conjunction with locating bush K1065. Accessories: Locating bush K1065. KIPP Ball lock pin without head Order No. D D1 D2...

Open the catalog to page 12
KIPP LOCKINGelements - 13

Ball lock pins with twist knob Material: Housing and pin steel. Knob thermoplastic PA (polyamide). Ball and spring stainless steel. Mounting dimensions Form A Form B Version: Housing nickel-plated. Pin tempered and nickel-plated. Knob reinforced fibreglass, black. Ball tempered. Sample order: K1064.620 Note: Installation dimensions for Form A for plate thickness 6 or 12 mm. Installation dimensions for Form B for plate thickness up to 20 mm. Includes M2 or M3 mounting screws. Attention: The specified pullout forces only apply in conjunction with locating bush K1065. Accessories: Locating...

Open the catalog to page 13
KIPP LOCKINGelements - 14

Locating bushes for ball lock pin Installation dimensions counterpart Material: Steel or stainless steel Version: Steel nickel-plated. Stainless steel bright. Sample order: K1065.61 Note: Mounting dimensions for Form A: Mounting with nut, max. plate thickness 10 mm. Mounting dimensions for Form B: Screwed in, for plate thicknesses over 10 mm or in a blind hole. Mounting example On request: Suitable nuts and assembly tool. Mounting example KIPP Locating bushes for ball lock pin

Open the catalog to page 14

All HEINRICH KIPP WERK GmbH & Co. KG catalogs and technical brochures

  1. K0123

    3 Pages

  2. K0475

    3 Pages

  3. K0051

    3 Pages

  4. KIPP NEWS

    8 Pages

  5. QUICKFINDER

    80 Pages

  6. K0544

    3 Pages

  7. K0380

    3 Pages

  8. K0522

    2 Pages

  9. KIPP Handles

    2 Pages