*mydirectindustry

KLT ? 10-30 t

Product catalog summary

Overview: The document provides technical specifications for KLT stacking tables used in transformer manufacturing, produced by Heinrich Georg GmbH Maschinenfabrik. These tables are designed for stacking and assembling transformer cores with varying capacities and configurations.

Specifications:

KLT 10–30 Tonne Stacking Tables: These tables have a capacity range from 10 to 30 tonnes. They support strip widths from 60 to 700 mm and have a stacking height ranging from 430 mm to 740 mm. The tables feature hydraulic movement from 0 to 90 degrees.
KLT 40–250 Tonne Stacking Tables: These tables support larger capacities from 40 to 200 tonnes. They accommodate strip widths from 100 to 1500 mm and have a stacking height up to 1500 mm. Core erection can be performed using a crane or hydraulics.

Key Features:

Hydraulic and crane-assisted core erection options.
Adjustable leg and yoke lengths to accommodate various transformer sizes.
Customizable configurations available upon request.

Contact Information: For further inquiries or custom requirements, contact Heinrich Georg GmbH Maschinenfabrik at their Kreuztal location via phone or email.

Catalog excerpts

KLT 10–30 tonne STACKING TABLES KLT Core stacking table Core assembling table Combined stacking & assembling table Table & core erection by hydraulics KLT 25 with integrated above floor hydraulic core erection Capacity without top yoke Strip width Yoke length (centre) Stacking height Table movement If you have a requirement outside this range please discuss with us! HEINRICH GEORG GMBH MASCHINENFABRIK TR ANSFORM ER DIVISION Siegener Straße 73–83 | D-57223 Kreuztal |

Open the catalog to page 1

KLT 40–250 tonne STACKING TABLES Core erection by crane Capacity without top yoke Strip width Yoke length (centre) Stacking height Table movement Crane + skid or hydraulic Crane + skid or hydraulic Crane + skid or hydraulic Crane + skid or hydraulic Crane + skid or hydraulic If you have a requirement outside this range please discuss with us! HEINRICH GEORG GMBH MASCHINENFABRIK TR ANSFORM ER DIVISION Siegener Straße 73–83 | D-57223 Kreuztal |

Open the catalog to page 2

All HEINRICH GEORG GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list